Lifting Machinery, buy RT75 Rough All Terrain Crane/ All terrain crane on China Suppliers Mobile

Product Details

Welcome to Oriemac!

As authorized dealer,we offer full kinds of construction machinery made by Chinese famous factory,including XCMG,SDLG,CHANGLIN,FOTON,LIUGONG,CHENGGONG.

Being in this line for 8 years ,we have exported thousands of products.You will get the

best service here and high quality products with competitive price!

Please contact us if you have any questions about the products.

Contact Person:Betty Ding

Skype: dgongzuo

Mobile/whatsapp/wechat: +86-182-2104-5926

Email:betty.ding at

RT75 Rough All Terrain Crane/ All terrain crane:

• Full-wheel drive, large ground clearance and strong off-road performance. It is suitable for off-road travel
• Complete-extension, half-extension and complete-retraction outrigger operation, no-outrigger operation and driving with load.
• Full-wheel steering, short wheel base, small turning radius, strong maneuverability; it is applicable to driving and operation in a narrow field
• The cab and operating room are integrated into one. Comprehensive lifting operation increases lifting capacity of the front
• The main boom adopts big rounded polygonal cross section and ultra thin sheet with partial reinforcement, which brings the materials' mechanical properties into full play, gives the materials good resistance to buckling and good elasticity and greatly reduces the main boom weight.
• The utilization of network node control technique can realize intelligent fault diagnosis, facilitate the troubleshooting for the electrical system of the complete vehicle and improve the maintainability of the electrical system.

Type	Ser. No.	Item		Unit	Value
Working performance	1	Max. rated lifting weight × working radius		kg.m/lb.ft	75000×3.0/165346×9.8
	2	Max. lifting moment of main boom		kN.m/lbf.ft	2250/2033477
	3	Max.lifting moment of longest boom		kN.m/lbf.ft	1160/855614
	4	Max. lifting height of main boom		m/ft	41/134.5 (Boom head sheave center)
	5	Max. lifting height of jib		m/ft	57/187
Dimensions	6	Outline dimensions (L×W×H)		mm/ft	14897×3395×3840 /48.8×11.1×12.6
	7	Distance between outriggers (longitudinal × transversal)		mm/ft	7380×7300 /24.2×23.95
	8	Main boom length (completely retracted – completely extended)		mm/ft	12500~38500 /41~126.3
	9	Jib length (completely retracted – completely extended)		mm/ft	10000~17000 /3.28~5.58
	10	Main boom angle of elevation		°	-3~78
	11	Swing range			360°continuously
Working speed	12	Max.speed of single rope on the drum of main winch		m/min	125
	13	Boom extension time		s	120
	14	Boom retraction time		s	90
	15	Boom derricking up time		s	70
	16	Boom derricking down time		s	70
	17	Swing speed		r/min	0.35~2
Hydraulic system	18	Engine to pump speed ratio			1
	19	Hydraulic oil tank capacity		L/gal	1000/220
		Model	Max. working pressure of the system Mpa (4400psi) and flow rate L/min (GPM)		Permissible working pressure Mpa (4400psi)
	20	P3145R00C1C30TC30N75S1B1E (variable pump)	348L/min(92GPM)@2500RPM@30MPa(4400psi)		32/4641
	21	1123032204 (dual-gear pump)	167L/min (44GPM)@2500RPM@21MPa(3000psi)		25/3625
	22	1121011285 (auxiliary gear pump)	67.5L/min(17.8GPM) @2500RPM@18MPa(3000psi)		21/3045.8
	23	A2FE56/6.1WVZL10 (swing motor)	93L/min@2050RPM@16MPa(2650psi)		40/5801
	24	3788084 (winch motor)	348L/min(92GPM)@3100RPM@30MPa(4400psi)		42/6091
Mass	25	Complete vehicle kerb mass		mt/ton	50/5