GCK low voltage draw out type switch cabinet (hereinafter referred to as switch cabinet) by the power distribution center (PC) cabinet and motor control center (MCC) two parts. The device is suitable for AC 50 (60) HZ, rated operating voltage is less than or equal to 660V, rated current 4000A and below the control distribution system, as power distribution, motor control and lighting and other distribution equipment.

GCK switchgear complies with the IEC60439-1, the voltage complete switch equipment and control equipment ", together, the voltage complete switch equipment and control equipment", GB/T14048.1-93 the low-voltage switch equipment and control equipment general "and other standards. And has a breaking high ability, dynamic thermal stability, advanced and reasonable structure, flexible electric scheme, series, strong versatility, all program units in any combination, a cabinet. The number of loops is more, save the area of the area, the protection level is high, the safety is reliable, the maintenance is convenient and so on.

1, the entire cabinet of the assembled structure, mounting hole modulus, high universality of the components, good applicability, high degree of standardization

2, the upper body for bus bar compartment, front electric chamber, a rear cable and wire chamber, each room plate or insulating plate isolation, to ensure safety. Only the handle in the breaking position when the door to open

3, MCC cabinet drawer chamber gate and a circuit breaker or disconnecting switch of the handle is provided with a mechanical interlock.

4, the electric switch, the contact switch and the MCC cabinet drawer has three positions: the connecting position, the test position, the open position.

5 the top of the switch cabinet can be installed on the bus bridge according to the needs of the electric power.