weaving machine, buy TDA-810 double warp beams Air jet loom/high efficeincy weaving machine on China Suppliers Mobile

Product Details

TDA-810 double warp beams Air jet loom/high efficeincy weaving machine

function and characteristics

♥ This series of looms due to its high rigid frame structure, suitable for weaving high density, high fine fabric.

♥ A let-off, take-up and each detection unit are used in electronic control thus to reduce the stop block,

the mechanical stop and warp/weft weaving defects such as short rates to improve the quality of production.

♥ Frame&beam rigidity is enhanced,the machine has good stability,beating-up mechanism further optimization.

♥ Structure more reasonable, can use four or six Linkage Beaing-up connecting rod.

The six connecting rod beating-up can prolong thetime for opening of warp and weft,

more suitable for wide loom weaving fabri, broaden the scope of weaving loom.

♥ The opening mechanism of this type is crank optional: opening,cam,electronic dobby, jacquard, electronic

let-off & take-up, variable density of weft knitting; warp stop, double weft electronic length measuring,

electronic weft storage, selvage yarn breaking detection,edge detection by catching weft yarn,

electronic control make the operation more humane.

♥ Reasonable structure: the further optimization of beam structure change the warp tension more sensitive.

♥ After the tension roller bracket installed outside of the frame, which is convenient for installation&repair.

♥ Can set all kinds of weaving parameters.

Main specifications of this weaving machine

Rate	up to 1235m/min, depending on fabric types
Reed space	150, 170, 190, 230, 280, 340cm
Weft	Short fiber-7 to 60 tex ( 80 to 10 Ne, need additional device if below 10Ne) Long fiber-5 to 44 tex (40 to 400den)
The main transmission	AC starting torque motor direct starting, slow forward and reverse running
beating-up	bilateral four connecting rod, the six connecting rod beating up
weft stop	double weft detection
Shedding	crank, cam, electronic dobby, jacquard
take up	electronical
Let -off	electronic let-of
weft supply	single colr, two color, four- color mixed free weft
Stops	6 lines of electronic stopping device
Sevage	leno (rough and plain)
Electronic control	using programmable computer controller as the core
Lubrication	the big gear, let-off, take- up gear box with the oil bath type lubrication, the other by forced centralized oil supply mode

Picture of this weaving machine

High strength frame structure

A strong machine frame has been constructed with box typed wall sheets, square tubes and angle beams,

Braces in the middle,support sheets,welded on the top&bottom side of the front beams,&solid beating beams.

New type rear beam structure

The latest dual real beam moving structure (patent No.201220635526.3) with swinging connecting

rod mounted outside, and since the overall structure is moved downward it is very easy to adjust.

New type of pressure relief unit

With all pressure adjusting valves located at one place (Patent No.201220633829.1),

it is easy to adjust, loss on air flow reduced, air source saved, and energy consumption reduced.

Raising and lowering structures of double rollers

At rolling up, the double roller structure can raise the upper and lower roller at the same time

which will take out the fabric together with take-up roller. It is easy, convenient, safe and reliable.

Easy checking and operation man-computer interface

Packaging and shipping

Exhibition

elcome to make inquiry and look forward to meeting you at Fairs coming

Customers visit us in factory

Our services

Try to make an inquiry then you will get response within 48 hours, with the support from our experienced

design and technique team, we sales team always get you best solution with our great enthusiasm.