Specifications

1 bailey structural bridge
2 Easy installed
3 Send engineers to give a guidance
4 Using unskilled labour

We can supply single or multi-span temporary and  structural bailey bridges, whatever single lane or double/two lane type. We are capable to manufacture it, and all necessary accessories.

Design load, span, usage are necessary factors that purchaser should show when inquiry.

Smart structure and easy moving facility bays are used as beams or columns, not as part of steel bridges.

The bridge can not only passing on one truck,but also can allow two trucks passing on it at the same time.

so if you vehicle flow is very huge,you can adopt the two lane bridge type.The standard double lane width is 7.35m.

 

Span Construction-Load Table ---Extra Single Lane (W=4200mm)
SPAN-ft	HS-15	HS-20	HS-25
30	SS	SS	SS
40	SS	SS	SS
50	SS	SS	SS
60	SS	SS	SS
70	SS	SS	SSR
80	SS	SSR	SSR
90	SSR	SSR	SSR
100	SSR	SSR	SSR
110	SSR	SSR	DS
120	SSR	DS	DSR1
130	DS	DSR1	DSR2H
140	DSR1	DSR2H	DSR3H
150	TSTSR2	DSR2H	DSR4H
160	DSR2H	DSR2H	TSR2
170	TSR2	TSR2	TSR3
180	TSR2	TSR3	TSR3H
190	TSR3H	TSR3	QSR4
200	QSR4	TSR3QSR3	QSR4
Span Construction-Load Table ---Double Lane (W=7350mm)
SPAN-ft	HS-15	HS-20	HS-25
30	SS	SS	SS
40	SS	SS	SS
50	SS	SS	SSR
60	SS	SSR	SSR
70	SSR	SSR	DS
80	SSR	DS	DSR1
90	SSRH	DSR1	DSR2H
100	DSR1	DSR2H	TSR2
110	DSR1	DSR2	QS
120	TS	DSR2H	TSR2
130	DSR2H	TSR2	TSR3
140	TSR2	TSR3	TSR3H
150	TSR3H	TSR3H	QSR4
160	QSR4	QSR4	QSR4
170	QSR4	QSR4
180	QSR4
1.SS shows one range one tier; DS shows two ranges one tier; TS shows three ranges one tier; DD shows two range two tiers etc.
2.If R follows SS, DS, DD, etc, means reinforce type,and R1 means only one range reinforced, R2 means two ranges reinforced etc.