SA1000 series spectrum analyzer
USD $4,500 - $6,000 /Set
Min.Order:1 Set
Beijing W&F Technology Co., Ltd.
SA1000 series spectrum analyzer
Spectrum analyzer description
Spectrum analyzer is portable spectrum analyzer and it is used to analyze RF signals with a comprehensive scope of measurement in the HFC network. This can also be used in analyzing the system of mobile communication, satellite and so on.
SA1000 series spectrum analyzer parameters as followings:
Frequency | ||
Frequency range |
| 9kHz ~ 1.8GHz |
Resolution |
| 1Hz |
Frequency readout accuracy |
| ±(frequency indication×frequency reference+1%×span+10%×RBW+0.5×[span/(number of sweep points-1)]+1Hz) |
Frequency Reference (internal10MHz) | Aging Rate | ±1ppm/year |
Temperature stability | ±0.1ppm (15℃~ 35℃) |
Resolution bandwidth(RBW) | ||
range(<10Hz Options) |
| 1 Hz ~ 3 MHz |
Resolution filter shape factor(60dB/3dB) | RBW≤500kHz | <5:1 Typical |
Accuracy | <5% Typical | |
Video bandwidth (VBW) |
| 10Hz ~ 3MHz |
Displayed average noise level(0dB attenuation,RBW=1Hz) | ||
Frequency | Preamp off | Preamp on |
100kHz ~ 1MHz | <-100dBm-3×(f/100kHz)dB | <-120dBm-3×(f/100kHz)dB |
1MHz ~ 10MHz | <-130dBm | <-150dBm |
10MHz ~ 1GHz | <-135dBm | <-155dBm |
1GHz ~ 1.8GHz | <-134dBm | <-153dBm |
SSB phase noise | ||
Carrier offset 30kHz | fc=500MHz
| -90dBc/Hz |
Carrier offset 100kHz | -100dBc/Hz | |
Carrier offset 1MHz | -110dBc/Hz |
Sweep time | ||
100Hz≤Span≤1GHz |
| 10ms ~ 3000s |
zero span |
| 1ms ~ 3000s |
Sweep mode |
| Continuous,single |
Amplitude Accuracy(20℃~ 30℃) | ||
Level measurement error(90%) |
| ±1.5dB |
Amplitude | ||
Maximum safe input level | Average continuous power | +23dBm |
DC voltage | 50VDC maximum | |
Input attenuator range |
| 0 ~ 30 dB,Steps of 1 dB |
1dB compression |
| +7dBm |
Spurious response | ||
TOI | >30MHz | +13dBm |
SHI |
| +30dBm |
Inherent residual response |
| <-90dBm |
Tracking generator (options) | ||
Frequency range |
| 100kHz to 1GHz |
Output level |
| -30dBm to 0dBm,Steps of 1 dB |
Output flatness | Tracking generator(100kHz to 1GHz) | ±3dB |
Signal generator(150MHz to 1GHz) | ±3dB |
Input/Output | ||
RF Input/Output |
| Type -N female; 50Ω |
USB | Device | USB 1.1 B plug |
Host | USB 2.0 A plug | |
LAN |
| 10/100 Base-T,RJ-45 Connectivity |
RS232 |
| 9pin D-SUB(male) |
Reference input/output | 10MHz,BNC female | Input level 0dBm to +10dBm |
Output level 0dBm±2dB | ||
VGA | 640×480,60Hz | 15pin D-SUB(female) |
External trig input | BNC female | 5V TTL(max:±10V,100mA) |
AM/FM Memodulation |
| earphone adapter |
General | ||
Display |
| 6.5 inch TFT LCD display |
| 640×480 | |
Weight |
| 4 kg |
Dimensions |
| 330(W)×163(H)×165(D)mm |
Operating Temperature range |
| 0℃~ 40℃ |
Storage Temperature range |
| -20℃~ 70℃ |
Power | Voltage range | 110~220VAC |
Frequency range | 40Hz ~ 60Hz | |
Power consumption | 20W |
Samples for your reference
If you are interested in our JDSU OTDR or have any requirement,please contact me by
Email: Joy@bjwftd DOT com
Skype: 3220355994@qq DOT com
Linked in: Joy@bjwftd DOT com