Product Details

Waste tyre to oil pyrolysis plant

Product Description

waste tyre to oil pyrolysis plant

The application of waste tyre to oil pyrolysis plant

1) it can be used to pyrolysis the solid waste(waste tyre, rubber, and something made from them)

2) it can be aslo recycling the liquid material: waste engine oil

3) and aslo the semi-solid material: semi-flow waste oil, such as waste residue oil

The composition about waste tyre to oil pyrolysis plant

This plant is made of many parts,of course the plant contains 3 three main systems and

a lot of small parts.

Cooling system

Horizental condenser: from the picture, we can see the internal structure.

Advantages: inside each condenser has many pieces gas pipe, cooling area can reach 40m²

the pipe is thin, so it can be cooled quickly.

looks more beautiful.

Disk flow condenser: inside the condenser, it is the disk flow

Advantages: 1) can enlarge the cooling area and cooling time

2) can imrove oil quality and yield.

Of course, we also have others cooling system for your chices, you can according

to your requirement and needs to choose them.

Dedusting system

The 1st one is defurization deduster: Remove the sulfur dioxide from the flue gas.

The 2nd one is spraying-deduster:a.circulatind water,no pollution

b.high pressure spray,dust absorption

c.the heat,add in alkaline and sulfur dioxide.

The 3rd one is water film cyclone:Remove the particles in the flue gas impurities.

Carbon black discharging system

The internal structure is the screw conveyor

Advantages:1)with the help of the screw conveyor, the carbon black can be discharged

at the high temperature.shorten the discharging time.

2) the carbon black can be storge in the carbon tank, so it more environmental and safety.

3) it can be discharge automatically, safe and save labor force.

The quality control about this plant

At this 9 steps, we pay attention every details about this plant

contrastion

Some contrast between old and newest design

The carbon black slag system

The picture at the bottom is the newest design about the carbon black discharging system, this design

can discharge the carbon black with the help of screw conveyor at the high tempareture,so that can save

running time,and with the help of carbon black tank, which can more enviromental and safer.

Final product after using the newest design

NO.	Name	Percentage	Usage
1	Tyre oil	45%	can be sold directly make diesel and gasoline by using oil distillation machine can be as fuel
2	carbon black	30%	can be sold directly make fine carbon by use carbon black refining machine. make pellet by use carbon make pellet machine
3	steel wire	15%	can be sold directly make steel bloom by use hydraulic press-packing
4	oil gas	10%	can be as fuel burn by use gas burn system(pyrolysis machine included) extra gas also be storage as fuel for other heating

Of course, the end product percentage will be some difference according to

different raw materail, although they are all plastic, there will be a little

differences,but the rate will in the range.

Packaging & Shipping

Packing methods for waste tyre to oil pyrolysis plant

1.Wood Packing, Shrink Packaging For the main parts
2. Packaging in Containers(under 2200mm),&Frames(above 2200mm)
3. Packaging As Your Requirements.

Our Services

Our service can provided for waste tyre to oil pyrolysis plant

Engineering design

we can offer custom-made design, layout design for customer's plant,various

configurations according to your needs.

Product manufacturing

professional manufacturing equipment,skilled workers and testing system gurantee

the quality of products.

Engineering installation

we will send engineer to customers factory for installation for every machine.

Production management consultant

we can provide maintance service during warranty and offer spare parts for