Product Details

JZ Series Automatic Continuous Waste Tyre Pyrolysis Plant / Recycling Machine

Production Flow:

Flow chat of used tyre rubber plastic pyrolysis plant

The 3D drawing of the equipment

◊Firstly, make reactor rotate clockwise 0.4r/min, put raw material into reactor, close feeding door.

◊ secondly, burned the fuel material(coal,or wood,or natural gas ,oil ) in the furnace. Reactor will be slowly heated, when the temperature reach around 180 oC, oil gas will come out .then go to cooling system and liquid to oil.

◊ thirdly, Some incondensable gas which can't cooling down will be lead to furnace through a gas pipe. It will be used to heat reactor.This can save your energy. Only the first 2 hours use energy for heating. After the first 2 hours mainly use gas, little energy is ok

◊ After pyrolysis, all the oil gas come out from reactor, the temperature will fall down. Then make it rotate anticlockwise, carbon black discharging begin.

◊ Lastly,when the temperature deduce to 80 oC, worker can open the door of reactor and take steel wire out.

Raw Material :

output

The equipment can pyrolysis waste tire, waste plastic and waste rubber, the outcome is crude oil and carbon black. If the raw material is waste tire, it can also output steel wires. All the products are used widely, so you can sell them directly.

Final Product	Fuel oil, carbon black, gas
Production Capacity	5T/8T/10T/12T
Heating Meterial	Coal, wood, natural gas, oil
Area needed	200m2
Life	5-8 years
Environmental Protection	Save fuel, No pollution
Safety Systerm	Security 100%
Certification	CE&ISO

Tyre Pyrolysis Equipment:

The equipment can pyrolysis waste tire, waste plastic,used oil and waste rubber, the outcome is crude oil and carbon black without pollution. If the raw material is waste tire, it can also output steel wires. All the products are used widely, in hotels,restaurants,bathing centers,power plants,engines,chemical sector you can sell them directly.

The equipment is composed by nine basic parts:

a.Main engine horizontal type revolving split processor

b.Separate system

c.Cooling liquefying system

d.Storage oil System

e.Waste gas recycling system

f.Desulfurization And Dedust system

g.Waste gas discharge system

h.Feed-in system

i.Carbon black slag system

Some features about our equipment:

1)Sufficient pyrolysis,good sealing and sigmoid water cooling system ensure the high oil yield;

2)Separate two times to ensure the gold quality of the oil;

3)Gas recycling save more fuel;

4)Dedusting system ensure no pollution;

5)Water seal,alarm,safety valve,pressure gauge ensure the safety.

Oil Storage Tank

Reactor

Gas Manifold

About oil yield of plastic:

Oil yield of Plastic
Name	Oil yield	Example
Polythene: PE	Arround 95%	thin film, diaphragm, film membrane, bottles,
		galvanic isolation materials, water pipes,
		oil tank, oil drum, drink bottle, milk bottle......
Polypropylene: PP	Arround 90%	thin film, plastic ropes, plastic crockery,
		basin,barrel, furniture, woven bag,
		bottle cap, vehicle bumpers...
Polystyrene: PS	Arround 90%	electrical appliance, stationery, food contane, toys...
ABS	Arround 40%
Paper mixture	Wet: 15-20%
Paper mixture	Dry: arround 60%
House garbage	30-50%

Consumption of pyrolysis plant
Feeding	1.5-2.0 hours
Preheating	2.0-3.0 hours
Producing oil	7.0-8.0 hours
Cooling	5.0-7.0 hours
Slagging	0.5-1.0 hour

Manufacturing process:

FAQ:

Q: How you can clean the emission to meet environmental standard?

A: 3 layers of dedusting system-alkali liquor wasing+ceramic filtering+alkali liquor sprayers. Extra gas from reactor will be recycled into furnace for heating, it will be cleaned by specific device before to be burned of cause. Ash and odor are also well prevented as the pyrolysis system is totally sealed, sepcially for continuous running plants.

Q: Can tire and plastic be mixed to be processed?

A: Generally, we don’t recommend you to mix them. Tire and plastic need different temperature and time to be processed. If you put them together, much fuel will be wasted. Besides, the quality and rate of final oil will also change.

Q: What’s the difference between continuous pyrolysis plant and intermittent pyrolysis plant?

A: They are different in the following aspects:

For the continuous type, the feeding of raw materials and discharging of slag are both automatic. While for the intermittent type, these two processes are manual.

For the continuous type, the feeding hole is very small, so the pretreating system is needed to cut the raw materials into small piece. While the intermittent type does not need this device.

The continuous plant can operate for some time without stop. While for the intermittent plant, the reactor must be cooled before the second batch.

Packaging & Shipping

1*40FR and 1*40HQ for 10 tons

2*40 HQ for 5 tons

Weight: about 30tons

All goods are packed with export standard package to make sure

no damage during transportation.

Our Services

1.Installation and Training: Our Company will send 1 technician for guiding your installation, testing the machine and training your workers. The installation period shall be 15-20 days. You shall pay salary for the technician with $100 per day and also the round-trip ticket and accommodation.

2. Warranty: 1). the reactor guarantee period shall be 12 months.

Worldwide Market:

Contact us