Product Details

PRODUCT PROCESS

Xinpeng are equipped with JLB250T hydraulic cold drawn set, LD120 cold rolling set, annealing furnace, honed and SRB machine, polishing machine, and some other advanced testing machine to make sure high quality of products.

Dimensions Tolerance

OD(mm)	ID(mm)	Tolerance
OD(mm)	ID(mm)	OD(mm)	ID(mm)	Wall thickness deviation(mm)	Ovality(mm)	Curvature(mm/m)
40-74	30-65	±0.01	-0.3,-0.5	≤0.5	≤0.1	0.3
74-98	65-85	±0.01	-0.4,-0.6	≤0.5	≤0.15	0.3
100-116	85-100	±0.02	-0.4,-0.6	≤0.6	≤0.15	0.3
124-134	110-115	±0.02	-0.6,-0.8	≤0.6	≤0.20	0.3
140-158	120-135	±0.02	-0.7,-0.9	≤0.8	≤0.20	0.3
165-176	140-150	±0.02	-0.7,-0.9	≤0.8	≤0.20	0.3
188-203	160-180	±0.02	-0.7,-0.9 (honed)	≤0.8	≤0.20	0.3

Mechanical Property

Delivery Condition	Cold drawn+stress-relieved(BK+S)(SR)			Cold finished(hard)(BK)
Steel Grade	Tensile strength (Rm Mpa)	Yield strength (ReH Mpa)	Elongation A5%	Tensile strength (Rm Mpa)	Elogation A5%
20#	≥520	≥375	≥15	≥550	≥8
45#	≥600	≥520	≥10	≥640	≥5
16Mn(Q345B Q345D)	≥600	≥520	≥14	≥640	≥5
25Mn	≥600	≥510	≥15	≥640	≥5
27SiMn	≥760	≥610	≥10	≥800	≥5
St45	≥520	≥375	≥15	≥550	≥5
E355(St52)	≥600	≥520	≥14	≥640	≥5
SAE1026	≥600	≥510	≥15	≥640	≥5

Our product

1 Hydraulic Cylinder Tube

Used in the hydraulic cylinder of the heavy machinery, Cranes, excavator also forklifts. We can work and get the mechanical property of the clients need.

2. SRB tube

Directly used in Elevatorbuffer and Hydraulic Cylinder .This kind tube have a better inner roughness , ra0.2-0.4um and can use directly in the hydraulic cylinder tube. Length can work at most 6M.

3. Cold finished tube

Widely Used. Processing range 30-300mm, biggest length is 11M.

The difference between precision steel pipe and seamless pipe?

1. the seamless steel tube with obvioue difference is that dimensional accuracy, can be up to 0.1mm.

2. high precision steel pipe diameter surface finish, the customer without processing can be used directly and ordinary seamless steel tube to the customer and lather, polishing processing.

3.Superior surface finish

4.Dimensional accuracy and excellent micro-structure uniformity

Packing

1. bundle packing

2. marking as per customer's requests

3. paint on the pipe as per customer request

4. pipe caps as customer request

Delivery condition

1. NBK(+N)

after cold forming, eventually above phase transition point, in a protective atmosphere of annealing oxidation medium

2. GBK(+A)

after cold forming, annealing in non oxidizing medium protective gas

3. BK(+C)

the final heat treatment after cold forming, therefore small steel pipe plastically, the plastically degree does not guarantee

4. BKW(+LC)

after final heat treatment, a tiny cold drawing deformation, continue again when machining steel pipe allowed inside certain limits cold deformation(bending, flaring)

5. BKS(+SR)

have a stress relief after cold forming, heat treatment, steel pipe can be carried out within a

certain limit in the appropriate processing

If you are intrested in our products, pls feel free to contact us!