Specifications
Self adhesive bitumen tapeHigh temperature and sun-shining
Length:15-44m/roll
Width:1ml
Thickness:1.2-5mm
Self adhesive bitumen tape/membrane
Product description
Self adhesive waterproofing membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as styrene butadiene), reinforced with polyester or fiberglass, finishing the upward face with fine sands, mineral slates (or grains) or polythene membrane etc. It has the outstanding performance such as: convenient to apply, no environmental pollution etc. This product is consisting of two kinds: without reinforcement and polyester reinforcement.
Product characteristic
1.Good flexibility, creep properties and ductility, has strong ability to adapt to the deformation of the base layer.
2.Self-healing ability, waterproofing layer can adhesive closely with the base layer.
3.Cold construction method, have strong lap joint reliability and base layer adhesion reliability.
4.The lap joint between membrane and base layer is voluntarily spliced. Convenient and safe to apply. Won’t cause environmental pollution.
5.Self adhesive waterproofing material can be applied on damp base layer using damp-spread construction method, using polymer cement plaster as the splicing dose. Quick to apply and adhesion is reliable.
Applicable scope
Widely used in the industrial architecture in the roofing civil and basement, underground tunnel, waterproof project, the system is also applicable to timberwork roofing and metal structure roofing waterproof project.
specifications performance
Since the sticky polymer modified asphalt waterproofing materials
[GB23441-2009(No child class)]
Serial number | Index/project | PE | PET | D | ||||
|
| |||||||
1 | Water impermeability0.2Mpa120min | waterproof | - | |||||
2 | Heat-resistant degrees | 700CSliding not more than2mm |
| |||||
3 | Tension(N/50mm) ≥ | 150 | 200 | 150 | 200 | - | ||
4 | Elongation%≥ | 200 | 30 | - | ||||
5 | Low gentle degrees 0C | -20—-30 | ||||||
6 | The viscousmin≥ | 20 | ||||||
7 | Peel strength N/mm | Coil and coil | 1.0 | |||||
Coil and aluminum | 1.5 | |||||||
Picture
Our company is the result of the UNION of several leading manufacturers in China, which have one sole DIRECT CHANNEL to the world .Most of our clients take our company as their production department. We also take them as our sales department. We are in the same chain and make mutual profits.
Hebei Cangzhou New Century Foreign Trade Co.,Ltd.
115 Dongfeng Road,Cangzhou City,Hebei,P.R.China Tel:+86-317-2207990 Fax:+86-317-2207990