Product Details

Product name: 60*45 Small diameter Honed cylinder pneumatic tubing

Xinpeng main products

1.Hydraulic Cylinder Tube------Main products of Xinpeng,

Used in the hydraulic cylinder of the heavy machinery, Cranes, excavator also forklifts. Material is various, mainly STKM-13CT ST52 CK45 and 1020. We can work and get the mechanical property of the clients need and extended the life of the hydraulic cylinder.

2.SRB tube ----- used in Elevatorbuffer and Hydraulic Cylinder .This kind tube have a better roughness inner the tube, ra0.2-0.4um and can use directly in the hydraulic cylinder tube. Range: ID 50-250mm and Length can work at most 6M.

3.Cold finished tube---- Widely Used. Processing range 30-300mm, biggest length is 11M.

About our productions:

Production Details:
Grade:	20#(CK20,AISI1020),45#(CK45,AISI1045),Q345,ST52(16Mn,Q345D), 42CrMo,25Mn (STKM13C-T),27SiMn.etc cold drawn seamless pipes honed/srb tube, precision steel tube
ID:	50-250mm
ID tolerance:	H8,H9 h10 H11
Surface roughness:	Ra 0.2—0.4μm
Final supply condition:	cold drawn and stress-relieved(BK+S)
Machining allowance:	0.5-1.5mm
Wall thickness:	10%×ID or better (customized)

Mechanics performance:
Material	Tensile strength	Yield strength	Elongation	Hardness
CK20/20#/AISI1020	>520 N/ mm2	>375 N/mm2	>15%	>85HB
CK45/45#/AISI1045	>600 N/ mm2	>520 N/ mm2	>15%	>85HB
ST52/16Mn/Q345D	>600 N/ mm2	>520 N/ mm2	>15%	>85HB
25Mn/STKM 13C-T	>600 N/ mm2	>530 N/ mm2	>15%	>85HB

Tolerance on ID:
No.	Inside diameter (mm)	ID machining allowance (mm)
1	300-80	0.5-0.8
2	81-125	0.7-1.1
3	125-200	0.9-1.2
4	200-250	1-1.5
Other dimension can be customize

Size ID*OD (mm) length can be fixed biggest 6M All size can Customized
40*50	90*110	140*170	190*215
40*55	95*110	145*170	190*220
50*60	95*115	150*170	190*225
50*65	100*110	150*175	200*220
55*70	100*114	150*180	200*225
60*70	100*115	155*180	200*230
60*75	100*120	160*175	200*245
60*78	100*125	160*180	200*250
63*73	105*125	160*185	220*250
63*75	110*125	160*190	220*270
63*76	110*130	160*195	225*250
63*78	115*130	165*190	240*273
65*80	115*135	165*205	250*290
70*80	120*140	170*200	250*300
70*82	125*140	180*200	200*213
70*85	125*145	180*205	200*216
70*90	125*150	180*210	250*266
75*90	130*150	180*215	60*45
80*92	130*155	180*220	70*57
80*95	130*160	185*205	90*80
80*100	135*160	185*215	102*90
85*100	140*160	185*220	50*40
90*105	140*165	190*210	55*40

Process :

About our test equipment:

Condition of Delivery

1. NBK(+N)

after cold forming, eventually above phase transition point, in a protective atmosphere of annealing oxidation medium

2. GBK(+A)

after cold forming, annealing in non oxidizing medium protective gas

3. BK(+C)

the final heat treatment after cold forming, therefore small steel pipe plastically, the plastically degree does not guarantee

4. BKW(+LC)

after final heat treatment, a tiny cold drawing deformation, continue again when machining steel pipe allowed inside certain limits cold deformation(bending, flaring)

5. BKS(+SR)

have a stress relief after cold forming, heat treatment, steel pipe can be carried out within a certain limit in the appropriate processing again

Size ID*OD (mm) length can be fixed biggest 6M
40*50	90*110	140*170	190*215
40*55	95*110	145*170	190*220
50*60	95*115	150*170	190*225
50*65	100*110	150*175	200*220
55*70	100*114	150*180	200*225
60*70	100*115	155*180	200*230
60*75	100*120	160*175	200*245
60*78	100*125	160*180	200*250
63*73	105*125	160*185	220*250
63*75	110*125	160*190	220*270
63*76	110*130	160*195	225*250
63*78	115*130	165*190	240*273
65*80	115*135	165*205	250*290
70*80	120*140	170*200	250*300
70*82	125*140	180*200	200*213
70*85	125*145	180*205	200*216
70*90	125*150	180*210	250*266
75*90	130*150	180*215	60*45
80*92	130*155	180*220	70*57
80*95	130*160	185*205	90*80
80*100	135*160	185*215	102*90
85*100	140*160	185*220	50*40
90*105	140*165	190*210	55*40