Product Details

China Manufacture on Cold finished Seamless steel precision tubes

Introduction:

hydraulic cylinder tube st52 din2391 is a kind of after cold rolling processing of a kind of high precison steel tube, full name cold rolled precision seamless steel tube. Precision seamless steel tube wall inside and outside the precision seamless steel pipe seamless steel pipe without oxidation layars, under high pressure without lea, high precision, high finish, cold bending deformation, flaring, flattening without cracks,etc, it is mainly used to produce pneumatic or hydraulic components products, such as a cylinder or cylinder, are made seamless tube. the chemical composition of precision seamless steel tube with carbon sulfur C,Si, Mn, S, P, Cr.

The difference between precision steel pipe and seamless pipe:

1. the seamless steel tube with obvioue difference is that dimensional accuracy, can be up to 0.1mm.

2. high precision steel pipe diameter surface finish, the customer without processing can be used directly and ordinary seamless steel tube to the customer and lather, polishing processing.

Features:

hydraulic cylinder tube st52 din2391 inside and outside the wall without oxidation layer, under high pressure, no leakage, high precision, high finish, cold bending deformation, flaring, flattening without cracks, surface rust proffing

1. The smaller outer diameter

2. High precision to do small batch production

3. Cold drawn finished products of high precision, good surface quality

4.The steel pipe transverse area is more complex

5. Steel pipe is superior performance, dense metal

Specifiation:

Standard	DIN2391, DIN2445, EN10305, GB/T 3639, GB 8713
Grade	ST35(E235), ST37, ST24(E255), ST52(E355), 10#, 20#, 35#, 45#
O.D.	4.0MM-400MM
W.T.	0.5MM-18MM
Surface Treatment	bare, varnished,oiled, anti-corrosion coating as request
Packing	1. bundle packing 2. marking as per customer's requests 3. paint on the pipe as per customer request 4. pipe caps as customer request
Condirion of Delivery	1. NBK(+N) after cold forming, eventually above phase transition point, in a protective atmosphere of annealing oxidation medium 2. GBK(+A) after cold forming, annealing in non oxidizing medium protective gas 3. BK(+C) the final heat treatment after cold forming, threfore small steel pipe plasticly, the plasticly degree does not guarantee 4. BKW(+LC) after final heat treatment, a tiny cold drawing deformation, continue again when machining steel pipe allowed inside certain limits cold deformation(bending, flaring) 5. BKS(+SR) have a stress relief after cold forming, heat treatment, steel pipe can be carried out within a certain limit in the appropriate processing again

hydraulic cylinder tube st52 din2391

Some Demension:

OD x WT	OD x WT	OD x WT	OD x WT
4*0.5	16*0.5	26*1.8	35*9.0
4*0.8	16*0.8	26*2.0	35*10
4*1.0	16*1.0	26*2.2	38*0.5
4*1.2	16*1.2	26*2.5	38*0.8
5*0.5	16*1.5	26*2.8	38*1.0
5*0.8	16*1.8	26*3.0	38*1.2
48*5.0	70*2.8	90*10	130*14
48*5.5	70*3.0	90*12	130*16
48*6.0	70*3.5	90*14	130*18
48*7.0	70*4.0	90*16	140*2.5
48*8.0	70*4.5	95*2.0	140*2.8
48*9.0	70*5.0	95*2.2	140*3.0

Process

Tolerance in Dimension:

OD	GB/T3639(GB8713)	DIN2391(EN10305)	Our Tolerence	Best Quality
4-30mm	±0.10mm	±0.08mm	±0.05mm	±0.02mm
31-40mm	±0.15mm	±0.15mm	±0.05mm	±0.03mm
41-50mm	±0.20mm	±0.20mm	±0.05mm	±0.03mm
51-60mm	±0.25mm	±0.25mm	±0.08mm	±0.03mm
61-70mm	±0.30mm	±0.30mm	±0.10mm	±0.05mm
71-160mm	±0.30mm	±0.30mm	±0.10mm	±0.05mm
Tolerance in WT	±0.12mm	±0.10mm	±0.05mm	±0.03mm

Process	Diameter	Length	Precision	Inner Hole Roughness
Cold Rolled	30-100mm	≤12 m	H8-H10	0.4-1.6
Cold Draw	30-250mm	≤12 m	H8-H10	0.8-1.6
Honing	40-500mm	≤12 m	H8-H9	0.4-0.8
Rolling	40-400mm	≤7 m	H8	0.4

Inner Diameter	H8	H9	H10
30mm	±0.033	±0.052	±0.084	5-30mm
30-50mm	±0.039	±0.062	±0.100	±0.080
50-80mm	±0.046	±0.074	±0.120
80-120mm	±0.054	±0.087	±0.140
120-180mm	±0.063	±0.100	±0.160
180-250mm	±0.072	±0.115	±0.185
250-315mm	±0.081	±0.130	±0.210
315-400mm	±0.089	±0.140	±0.230

hydraulic cylinder tube st52 din2391

Mechanical Properties:

Condition	Materail Grade	T.S (MPa)	Y.S (MPa)	Elongation(%)
BKS	ST35 (10#)	≥420	≥315	≥14
BKS	ST45(20#)	≥520	≥375	≥12
BKS	ST52(16Mn)	≥580	≥420	≥10
GBK	ST35 (10#)	≥315		≥35
GBK	ST45(20#)	≥390		≥32
GBK	ST52(16Mn)	≥490		≥30
NBK	ST35 (10#)	340-470	≥235	≥32
NBK	ST45(20#)	440-570	≥255	≥30
NBK	ST52(16Mn)	490-630	≥335	≥28

Application:

hydraulic cylinder tube st52 din2391 widely used in hydraulic system with precision steel tube, injection molding machine with precision steel tube, hydraulic press with precision steel tube, shipbuilding with steel tube, EVA foaming, hydraulic machinery, hydraulic cutting machine, shoe making machinery, hydraulic equipment, high pressure tubing, hydraulic tubing, card sets of joints, pipe joints, rubber machinery, forging machinery, casting machinery, engineering machinery, automotive high pressure steel pipe concrete pump, sanitation vehicle, automobile industry, shipbuilding industry, metal processing, military industry, diesel engine, the internal combustion engine, air compressor, construction machinery, forestrymachinery, etc.

About our service:

1. Cargo track service during transporting and feedback service after cargo is loaded on board

2. Flexible terms of payment by

3. Big discount for repeat customers

4. Smooth delivering procedure

5. Payment Terms: T/T , L/C And so on.

If there is any Question, please feel free to send us inquiry.

We will provide the professional Explanation.

We always do our Best!

Why you choose us as your best choice?

Our quality is the top five in China. Raw material is mainly from some famous refinery steel mills, such as BAO STEEL, Tianjin, and Chengdu etc, which are the best and largest raw material manufacturers in China.
we have been through ISO9001:2008 international quality system certification.
Warranty period for our honed tubes and chrome bars is 2 years. For some special or important customers, the period is 5 years.
All the orders, records of production and inspection would be kept for 5 years
High Precision:

Honed tube (Roughness of tube is 0.2μm and straightness is less than 0.15/1000), piston rod (Plating thickness is 10-100 micron. Surface roughness is 0.2μm and straightness is also less than 0.15/1000)

Product details are completely according to International Standard, chrome rod and honed tube must be cut flatly, and no chrome marks on the surface of rod. (Most of domestic mills don’t do this in order to reduce cost)

Delivery time is very fast. The average delivery time is 5-30 days after confirming the orders.
Package:banding with steel strips, braiding parcel at outside
Conservation: Anti rust oiled coating on the inside and outside of the surface, plastic caps at both ends.

Photos Showing of Yantai Xinpeng Steel pipe Co,.ltd.

Our customers