40~500MA non-isolated led driver tube
USD $1 - $1.5 /Piece
Min.Order:1 Piece
Shenzhen Lotoo Lighting Co., Ltd.
led driver tube specfication
4~25W non-isolated led driver test reports | ||
Output | no-load Max voltage | 120V±5% |
constant current range of application | 36V~100V | |
constant current | 40~500MA | |
Max power | 4~25W | |
ripple wave and noise Max | 500mvp-p | |
constant current erro | ±3% | |
load adjustment rate | ±3% | |
start,rise time | <3S 230VAC full load | |
maintain time | 10ms 230VAC full load | |
Input | voltage scope | 110V~265V |
Frequency scope | 47~63HZ | |
power factor | PF≥0.97 230VAC( full load rated output voltage) | |
efficiency(230V AC) | ≥0.95 | |
alternating current | 0.123A/230AC | |
surge voltage | 30A/230V | |
leak current | <0.15MA/265AC | |
protection | Over-protection current | protection type:stop work,rocover after unusual remove |
short circuit protection | protection type:stop work,rocover after unusual remove | |
thermal protection | protection type:stop work,rocover after unusual remove | |
environment | working environment | 20%~90% |
working temperature | —30~80°C | |
storange temperature ,humidity | 40~80°C,10~95%RH | |
temperature factor | ±0.03%/°C | |
others | size | 180*15.5*10.5mm |
adaptor | EFD(more big better for heat dissipation |
Led driver tube description
1. Overload Protection,Overheating Protection
2. Over Voltage Protection,Short Circuit Protection
3. Easy Installation for LED Lighting
4. LED driver for T8,T9,T10 LED tube.
Led driver tube specfication
1. Adopts integrated device design, low temperature rise, low calorific value.
2. High stability, drive stable work, output current constant, no drift.
3. High security, suitable for high humidity, high dust, strong vibration environment of use;Chip inside integrated over-voltage, over-current, overheat protective circuit.
4. Has the maximum output power limiting function, to avoid the impact of the LED
5. Long use life design, normal life in 60,000 hours.
6. Through the corresponding temperature testing, aging test, efficacy test and short circuit testing.
7.May be based on customer demand of custom-made related size and function driver module.
our equipment show for led light driver