Product Details

STRUCTURAL FEATURES:

The roll is made of chilled cast iron of vanadium and titanium alloys. The roll face is hard and anti-wear. Both the front roll and the back roll are plain. The internal cavity of the roll is processed to ensure temperature well proportioned on the roll surface.

For XKJ-480H, the back roll is circumferentially drilled for better cooling and the front & the back rolls are supported with roller bearings.

The machine is equipped with an overload protection device to prevent the major components from being damaged due to overloading.

The machine is also equipped with an emergency device. When an emergent accident happens, just draw the safety pull-rod, and the machine will stop immediately. It is safe and reliable.

The machine is equipped with scraper and wind-up unit, which can take the reclaiming rubber off from the winding-up roller.

APPLICATION:

The machine is applicable for refining reclaimed rubber.

Technical Parameters:

Model & Spec.		XKJ-480B
Working Diameter of Front Roll (mm)		480
Working Diameter of Back Roll (mm)		610
Working Length of F. & B. Rolls (mm)		800
Linear Speed of F. Roll (m/min)		25.85
Linear Speed Ratio of F. & B. Rolls		1:1.82
Maximum Nip		15
Output (Kg/h)		300
Main Motor Power (KW)		55/75
Speed Reducer		NGW Planetary Hardened-gear Speed Reducer
Overall Dimensions	Length	5030
	Width	2580
	High	1863
Notes: 1. All the models may be optionally equipped with roller bearings; 2. The above parameters like the roll speed, the speed ratio, etc. can be customized.