HDMI USB KVM Extender (HLHC050B)

  Introduction:

This extender supportsUSB HID mouse and keyboard, remote IR(RX->TX) and bi-direction RS232 URAT. This product can achieve all functions through single CAT5e. Extending distance is 50 meters.

Main features:

1.  Extending distance is 170ft(50meters) at resolutions 1080P 3Dor 1920x1200 60fs, and 270ft(80 meters)          at 1080i/720Pthrough single CAT5e cable.

2. Support audio formats, Dolby True HD, DTS-master, etc.

3. Support 3D signals(all 7 formats), include new ones, such as Frame Packing, Side-by-    Side,Top-to-Bottom, etc.

4. Support EDID, CEC.

5. VESA DDC and hot swap technology (HPD).

6. 38Khz remote IR (RX->TX).

7. USB HID mouse and keyboard (RX->TX).

8. Bi-direction RS232 UART communication.

9. Compatible with HDCP 1.2.

10. Compatible DVI 1.0.

11. Support cascade to enhance extending distance.

12.  Industrial metal case, easy to install.

 Parameters

Installation

Installation details and cautions

Before installation

a) Prepare place for installing system. The transmitter should be close to video sources, and the receiver should be close to display terminals. The HDMI cables should be both less than 1.5 meters.

b).Basing on real request, make CAT5e/6 cables for connecting the transmitter and the receiver. The length can NOT be more than distance of parameters.

c).CAT5e/6 cables should be far away from electromagnetic disturbance sources. Such as AC motors, electrosoldering, fluorescents, microwave ovens, etc. These disturbance sources might affect extending distance or video quality.

d).Ensure the length of cable is suitable, no external tensions.

e).Ensure reliable AC plug base.

Typical installation instruction

Connect the PC and HD monitors to extend video, mouse and keyboard:

Connect a player and a HDTV:

Transmitter side connection

a). Connect your PC or Player and HDMI IN port of transmitter with HDMI cable (HDMI cables are not included in this product).

b). Connect PC and transmitter using USB type-A totype-B cable. Type-A port connects PC, type-B port connects transmitter. (Model A only)

c). Using standard RS232 cable connects PC or other equipment to transmitters DB9 port. (Model A only)

d). Insert IR blaster cable to extender TX IR OUT port. IR blaster should be close to your player or other controlled equipment.

e). Insert CAT5e/6 cable to CAT5e/6 port.

f). Connect power adapter.

Receiver side connection

a). Connect your HDTV and HDMI OUT port of receiver with HDMI cable (HDMI cables are not included in this product).

b). Connect mouse and keyboard to receiver USB ports separately. (Model A only)

c). Using standard RS232 cable connects external equipment to receiver DB9 port. (Model A only)

d). Insert IR receiving cable to extender RX IR IN port. IR receiver should be face outside for easy operation.

e). Insert CAT5e/6 cable to CAT5e/6 port.

f). Connect power adapter.

Install products on walls or frames

There are type-L metal brackets. It is easy to fix transmitters or receivers on walls.

a). Fix two metal hangers with screws.

b). Makes holes with hand drill on walls, place rubber keeper into the holes. For frame installation, no need for this step.

c). Fix products on walls or frames with screws.

Product pictures:

2014 China Souring Fair (HK)

HDMI License :