Product Details

Our main products are as jacquard parts, dobby parts, display, Sensors, encoder, and kinds Breadboards, harness installation, frame, heald wire, dropper, cams, HS918 intelligent sectional warping machine, beam, and etc. They are widely applied in rapier, jacquard, air-jet,projectile, water-jet, gripper machine of STAUBLI,BONAS,MULLER,GROSSE, PICANOL,SOMET,TUSDAKOMA,TOYOTA, SULZER,DONNIER ,IRO, BENNINGER,and etc.

We are devoted to absolute sincerity cooperation and determined to make progress. We would like to work together with you to describe the blueprint of textile industry.

TECHNICAL SPECIFICATIONS
		parameters
	Description of the Jacquard machine
1	Jacquard machine type and hooks	Staubli CX960-4056
2	Gantry height“H”	3500 mm aprox
3	The large shed	150 mm aprox
4	The small shed	80 mm approx
	Weaving machine
1	Loom Type	Gunne PZ 180
2	Nominal reeds width	175 cm
3	Speed	200 rpm
4	Electrical drive or module drive of the colors
5	Transmission side	Right
6	Distance from ground to comb board frame"S"	150 cm aprox
7	Distance between fixing hole at two side of comb board"F"	170 cm
8	Kind of woven fabric	Polyester,Acrylic ,Wool
9	Yarn type and thickness	36/2 Nm or 450-600 Denier
10	Distance from Shed opening to Ground "J"	100 cm approx
11	Distance from shed front point to first line heald wire"K"	20 cm approx
	Drawing in specifications
1	Repeat of pattern	3
2	Hooks of every pattern	1288 ( because in velvet used for each harness two hook we has 2576/ 1288 harness for every pattern total 3864 harness)
3	Selvedge quantity and hooks quantity for every selvedge	woven on cam
4	Ends quantiy for every selvedge	woven on cam
5	Total Nbr of ends (with selvedges)	3864 ends / 169 cm
6	Yarn density(without selvedge)
7	Width without selvedges	169 cm
8	width with selvedges"M"	174cm
9	Reed eyes/cm	57/ cm
10	Yarn quantity for every reed eye	4 pile with harness( 4 warp which woven by cam)