Specifications
1 Streamline designed exterior2 applies to the current advanced lead free soldering technique
3 wave soldering machine
Feature:
1. Streamline designed exterior and all tempered glass overseeing window.
2.It applies to the current advanced lead –free soldering technique, suitable for SMT and through-hole lead-free soldering. 3.Windows XP operation interface and PCL control.
4.Flux spray nozzle self-cleaning system, auto-adjusting the spray speed & square according to the conveyor speed and PCB dimension.
5.Standard cool air knife after flux spraying and flux reclaim system to reduce the pollution of PCB and environments.
6.Special made conveyor rails to ensure no deformation; quick replacement titanium alloy fingers designed, convenient for replacement and maintenance.
7. Equipped with thermal compensation to enable temp. Dropped ≤2°C before entering soldering zone, reduced the thermal impact on components .
8.Solder dross auto-gathering function and patented anti-oxidization sleeve design to reduce the dross significantly.
9. Equipped with over-temp. alarm & protection, emergency quick-stop system and overioad protection for all motors.
Photos
| The quantity of heat compensatory unit for preheating; satisfy the high temperature demand in lead-free soldering guarantee the declined range of temperature from within 2°C | Titanium alloy solder bath suitable for lead-free solder. | ||
| Auto supply flux system, buffer pump is anti-corrosion, buffer tank is sealed with limit liquid inspection. Flux spraying flux container can be exchanged on line. | Cooling system: with the cooling speed of 10°C/s or higher, fillet lifting effect on through-hope PCB can be reduced greatly and rough surface on solder joint in slow cooling can also be eliminated. |
Model Specification |
ZSW-350PC-B |
ZSW-350 | |
Power supply | 3P5W.380V/220 50/60HZ 63A | 3P5W.380V/220 50/60HZ 63A | |
Startup power | 22.5KW | 22.5KW | |
Operation power consumption | 12 KW | 12KW | |
Control system | Computer + PLC | Botton +PLC | |
Spray system | |||
Transmission method | Step motor | Air cylinder | |
Spray pressure | 0.25MPa -0.4MPa | 10-100ml/min | |
Flux flow arrange | 10-100ml/min | 10-100ml/min | |
Auto fill flux | S | S | |
exhaust | Up&down exhaust | Up exhsust | |
Exhaust ducting diameter | 200 | 200 | |
Exhaust capacity | 25M3/min | 25M3/min | |
Preheating system | |||
Preheating mode | Hot air | IR tube | |
Control mode | PID+SSR | PID+SSR | |
Preheating zone number | 3 | 3 | |
Preheating lenght(mm) | 1800 | 1800 | |
Preheating temperature | Room temperature 250°C | Room temperature 250°C | |
Warm-up time (min) | Approx *15 min(setting:150°C) | Approx *15 min(setting:150°C) | |
Blower motor | S | N/A | |
Conveyor system | |||
PCB width (L*W)mm | Min 80*60 ,Max 400*350 | Min 80*60 ,Max 400*350 | |
PCB conveyor direction | L-R option:R-L | L-R option:R-L | |
PCB conveyor speed | 0-2000 | 0-2000 | |
Conveyor height | 750±20 | 750±20 | |
Available component height | Top:120mm bottom :15mm | Top:120mm bottom :15mm | |
Conveyor speed control mode | Closed loop | Closed loop | |
Finger | Quiek ehange finger (standard) Titanium duck jaw finger(option) Spring duck jaw finger (option) Metallic duck jaw finger(option) Resinous duck jaw finger (option) | ||
Conveyor width control | Manual | Manual | |
Conveyor angle | 4°- 7° | 4°- 7 ° | |
Soldering system | |||
Solder pot style | Motor drive | Motor drive | |
Solder pot material | Full titanium (option:SUS 316L) | Full titanium (option:SUS 316L) | |
Wave height adjust | Inverter | Inverter | |
Heater power | 380 VAC 12KW | 380 VAC 12KW | |
Solder pot temperature | 300°C | 300°C | |
Solder pot capacity | Tin lead 720kg lead free 550kg | Tin lead 720kg lead free 550kg | |
Wave driver power | 1/4 HP*23P 220VAC | 1/4 HP*23P 220VAC | |
Solder pot warm-up time | Approx.180min setting 250°C | Approx.180min setting 250°C | |
Temperature control mode | PID+SSR | PID+SSR | |
Cooling system | |||
Cooling method | Forced air/air cooler is ption | Forced air/air cooler is ption | |
Other | |||
Fingrer cleaning system | Brush | Brush | |
Return trip lifing | S | S | |
option | |||
Center support | O | O | |
J-sonic ultrasonic spray | O | O | |
Top heating | O | O | |
Ups protection | O | O | |
Nitrogen device | O | O | |
Feeder knife | O | O | |
Weight | Approx.2000kg | Approx.2000kg | |
Dimension (L*W*H)mm | 4537*1530*1760 | 4450*1530*1710 | |