Specifications

1.pcb separator
2.cut both small and large PCB fast and economicaly.
3.400mm separation length(adjustable)

Features:

PCB Separator,SM-2008A separates both small and large PCBs fast and economicaly. To optimize operation,the separation length can be programmed.

Safe operation

The PCB is placed with its pre-scored groove onto the linear blade,when the foot swith is pressed,the blade carrier with the circular blade moves across the PCB,separating it into individual units.

The clearance between the upper guide and the linear blade is adjustable to ensure that the PCB is only separated in the pre-scored groove.

Recommended pre-scored grooves

The pre-scored grooves can be interrupted by any number of cutouts.

If components project above the groove,the linear blade needs to be cut out, in such a case,contact us.

• Programmable cutting lengths ranging to 460mm, eliminating time-consuming unnecessary board travel. (Cut length of up to 600mm also available)
• Motorized circular blade cuts against the linear blade to ensure clean, burr-free processing without board stress.
• Programmable to exact cutting length required.
• Will depanel PCBs with components 1mm from the score line.
• Quick-lock design for easy circular blade setup to any PCB thickness.
• Hardened tooled steel long-life blades
• Large processing table, which can be angled to permit processed boards to fall away.
• For operator safety, there are blade-halting light sensors and a Plexiglas safety shield.

 Technical Date

Separator type	Components side circular blade Solder side linear blade
Operation	Motorized driver
Separation length	0-400mm
Separation speed	adjustable
Mains voltage	dual voltage 230/115v 50-60HZ
Earthing stud	10mm
Operation temp	15-25
Storage/transport temperature	-20-50
humidity	non-condensing 10-85
Weight	40kg
Dimensions	H*W*D 950*530*430mm
The machines comply with the safety regulations of the EC directives

 

 PCB panels

 

 

Cutting PCB board:

 

 

Packaging :