Specifications

Lube Oil Filling Machine automatic to fill 1 to 4 ltrs in cans complete with capping and sealing unit

 

ANNEXURE – A                       :           6 HEAD FILLING MACHINE

Model Name                         :           VF-6X

Filling Range                         :           250ml  to 5Litres

No of Filling Heads               :           Six

Filling Mode                          :           Automatic

Application                            :           Lubricants

 

Flexibility

Flexible to fill from 250ml to 5Litres without any change parts. Entire range can be set on the same machine with nominal adjustments for different pack sizes. Change-over time minimum applicable. The machine comprises of 8 nozzles.

 

Machine Operation

The machine has its own pumping system to connect with the main/buffer tank of the product to be filled. The volume to be filled is measured by the German flow meter, which consists of geared system

as in below.

 

The Main system can be explained with the normal gear system model diagram. where bottom is the suction and top is the discharge.

 

The discharge is connected with the positive shut-off nozzle which when opens the Spur Gear flow meter which starts rotating due to the flow of oil pumped through the pumping system given with the machine and the non contact sensor mounted on flow meter starts counting electronics pulses which gives feedback to the PLC (Programmable Logic Controller) for the volume to be dispensed.

 

 

 

 

 

 

 

 Fast flow “cut-off” and Final flow “cut-off” can be set through PLC (through HMI which is provided on the control panel) with interval between the two for each nozzle with increments of 1ml up to 5Litres.