Specifications

Attritor
Min. Order: 1 Set
Supply Ability: 5 Set/Sets per Month

 

CONSTRUCTION  :   The Vessel is made from 10mm thick S.S.304.  material  to withstand heavy loads and is provided with a top cover in two  halves which  can be locked on to the main vessel by means of eye  bolts.   A jacket  in  MS.  construction for heating and cooling  is  provided complete  with inlet outlet and drain fittings.  A specially  designed ball  valve with strainer is provided at the bottom of the vessel  for quick discharge of material.  The complete vessel is mounted on  steel shafts  perfectly balanced and housed on the  frame  structure.   The entire  vessel  can  be  tilted by means of  a mechanical  device  to facilitate  cleaning operations.  The main shaft is connected  to the output  end of  the gear box assembly by means of  a  C.I./M.S.  rigid flange type coupling.  The shaft is carefully machined and fitted with specially designed adjustable attrition arms which rotates at 120 RPM.

 

ELECTRICALS :  The motor will be  3 phase, 50 cycle, Flame Proof or TEFC

 

DRIVE  :  The drive unit is enclosed in steel cabinets  supported  and stiffened by structural and is complete with Flame Proof electrical control Panel.