Specifications

ABS Filament for Makerbot
3D printer filament no bubble
3D printer filament factory outlet
3D printer filament SGS
ROHS

full colors 1.75mm ABS PLA 3D Printing Filament Material for Makerbot

Most materials currently used in 3D printing are plastics.  PLA and ABS plastic is by far the most common materials.

The features as below:

(1) High strength, good toughness;
(2) Density is small, when printing larger volume model lighter, save money;
(3) Cost-effective, can be processed in wide range temperature;
(4) ABS softer than PLA;
(5) Diameter of 3.0/1.75mm, variations + /-0.1mm,roundness +/-0.05mm;
(6) 1 kg /plastic spool packaging, can be automatic feed;
(7) To be applied to a variety of 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc.

(8) No Bubble

ABS (Acrylonitrile butadiene styrene) is considered to be the second easiest material to work with when you start 3D printing. ABS is an engineering polymer commonly used to produce car bumpers due to its toughness and strength. It’s also the stuff that Lego blocks are made of…tough enough but safe enough for the kids to handle!
Please note however, consideration must be made when printing larger objects – thermal stress can cause ABS to warp as the part cools.
ABS is suitable to make light, rigid, moulded products with good shock absorbance and wear resistance.
ABS is available in white, black, red, blue, yellow and green colours and has a matte appearance.

PLA Material

biodegradable thermoplastic that has been derived from renewable resources such as corn starch and sugar canes. This makes PLA environmentally friendly and very safe to work with.
PLA also has a very sharp glass transition point so if you use a fan to cool it, on printing it will set to solid very quickly. This has the advantage of achieving a greater range of geometries than are possible with other plastics. It also reduces the thermal stress on the printed part - warping becomes less of an issue in larger parts when you print with PLA.
Solid PLA is available in white, black, blue, purple, yellow and green colours.

Material Specification: