reinforcement truss mesh Ladder-Mesh

Truss mesh reinforcement is necessary for masonry wall construction. Truss mesh reinforcements are embedded into the horizontal mortar joints of masonry walls. So it can

continuous the wall length.

Wire dia:1.8mm-2.0mm.
Weight: 2kg-10kg.
Material: SS wire, iron.
Usage: construction.
Materials Available: hot dipped galvanized, electro galvanized or stainless steel.
Contact: Livy  sales5 AT chinaironwire DOT org

Truss-Mesh is a truss type continuous length joint reinforcement for single wythe walls.

Truss-Mesh and  Ladder-Mesh are continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls
Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction, as it offers the following benefits:
Reinforces a variety of masonry walls
Greatly reduces cracking that can arise from thermal stresses
Enhances resistance to water penetration, as cracks are controlled
Increases lateral flexural strength
Bonds exterior and interior masonry wythes together in composite walls
Bonds masonry at intersecting walls and corners
Increases elasticity
Increases performance of masonry walls under various stresses
Fabricated in conformance with ASCE/ACI 530 building code requirements for masonry structures, and ASTM A 951 (standard specification for masonry joint reinforcement)
GAUGES:

Reinforcing can be STANDARD WEIGHT (9 ga x 9 ga), EXTRA HEAVY (3/16" Side Rods x 9 ga Cross Rods) or SUPER HEAVY DUTY (all 3/16")
AVAILABLE FINISHES:

Mill Galvanized
Hot Dip Galvanized
Stainless Steel
DIMENSIONS:

Packed 500’ per bundle (50 pcs. - 10' long)
Tri-Mesh, Twin-Mesh and Box-Mesh packed 250’ per bundle (25 pcs. - 10’ long)
Corners and Tees packed 25 pcs per bundle