10A Waterproof Controller
USD $1 - $50 /Piece
Min.Order:100 Pieces
Solar controller
Solar street lamps controller is a through the microprocessor control and display the intelligent charging and discharging controller, the high quality, low loss, the life is long components, to ensure the reliable performance, to make the street lamp system can long normal work, reduce the system maintenance cost, especially the maintenance of batteries to significantly reduce the cost.
ESG series solar street lamps controller can adapt to bad work environment, can provide two loaded access by setting the function can be key to set up and free time set up light work time, according to the strength of the light automatic open or closed load, and can be used in low pressure LED, sodium lamp, energy-saving lamp, metal halide lamp, street lamp, garden lamp series of lighting system.
Product feature:
1.MCU control,achieve charge and discharge intelligent control.
2.With perfect memory function, the controller can according to the interrupt mode of work in front,when the controller re-energized
3.Time and light control, you can set any value at ten minutes 15 hours, realization of timing accuracy fine.
4.It has perfect battery over charge and discharge protection function.
5.Battery open-circuit,over voltage,output short-circuits protection function.
6.Bollard cell converse connection,converse charge protection at night.
7.Under voltage protection,shock protection,low no-load wasting.
8.Temperature compensation.
1).Product picture, Dimension figure:
2). Product features
(1). IP68 waterproof level, aluminum shell design, can effectively prevent all kinds of corrosion.
(2). 12 V / 24 V voltage to be automatic identification system.
(3). LED digital display and waterproof the key operate, use simple and quick.
(4). Improved tasting charging algorithm, every week for a balanced battery charging, effective
Prevent battery not balanced and curing phenomenon, improve battery service life.
(5). Five kind of load mode, convenient use in all kinds of street lamp and monitoring equipment.
(6). External temperature sensor, and has high precision temperature compensation.
(7) Parameters set off electricity save function without repeating Settings, convenience and fast.
(8) All kinds of state instructions.
(9). With the charger, discharge, overload protection and electronic short circuit protection and meter protector against fraud protection.
(10) TVS lightning protection.
System voltage | 12V/24V Auto |
System current | 5A/10A/15A |
No-load loss | < 5mA |
Solar input voltage | < 55V |
Over-voltage protection | 16.5V;×2/24V |
Balance charge voltage | 14.6V;× 2/24 V (25 °C), maintain time: 1 hour |
Ascension recharging voltage | 14.4V;2/24 V (25 °C), maintain time: two hours |
Float charging pressure | 13.8V;×2/24V (25°C) |
Charging to return to voltage | 13.2V;×2/24V (25°C) |
Discharge to return to voltage | 12.5V;×2/24V |
Discharge protection | 10.8V;×2/24V |
Temperature compensation | -4.0mv/°C/2V; |
Electric voltage | Electric drive 7 V, electric close 2 V |
Electric tell time | 1min |
Overload, short circuit protection | 1.25 times rated current 3 minutes to be automatic recovery; 1.5 times rated current 5 minutes to be automatic recovery; ≥2 times rated current frequency, short circuit protection, could not be restored, need to manually check the recovery |
Working temperature | -35 °C to + 65 °C; |
Protection grade | IP68 |
weight | 0.15Kg |
size | 65 x 67 x 18 (mm) (long x width × high) |
Our promise