Product Details

12V/24V 96 volt solar charge controller mppt for solar panel 20 amp

It is a new type advanced solar charge controller produced by our company, which using MPPT technology, the charging efficiency improved 30% more than PWM Charging mode, it saves more than 30% solar panel and saves much cost for users. This type Advanced Solar Charge Controller has perfect functions, it helps charging for various types of battery. Using three period charging mode,Intelligent heat dissipation control,99% conversion efficiency and other advantages, our mppt solar charge controller is widely used for solar off grid system(independent system).

Controller will work when input voltage is bigger than battery bank voltage, or it won’t work.
Controller will stop working when input voltage is bigger than 130V(M48-30),170V(M48-40,M96), it needs to be powered off, the input voltage is adjusted to less than 130V(M48-30),170V(M48-40, M96), restart and then controller can work again.
If the load current exceeds the upper limit of the controller, several controllers can be connected in parallel,and connect the input ends to battery at the same time,but the input ends of each controller must be independent access, and meet the range of single controller operating parameters, or controller will be burned to damage.

Mode	M48-30	M48-40	M96-30	M96-40
Charging Mode	MPPT
Charging Method	Three period charging mode(constant current, constant voltage and float)
Input Voltage Range	23V-130V	23V-170V	23V-170V	23V-170V
Output Voltage Range	8V-60V	8V-60V	8V-120V	8V-120V
Battery bank voltage	DC12V/24V/36V/48V/96V,( freely setting according to right condition )
Controller output voltage Setting	Please check the system voltage for reference,to finalise the output voltage setting.
Output Current Range	0-30A	0-40A	0-30A	0-40A
Soft-start time	≤5S
Dynamic response recovery time	500us
overall efficiency	96%—99%
PV module utilization	≥99%
Battery Type	Battery, lithium battery, etc.
Electrical Parameters
Isolation type	Non-Isolated
Working temperature range	-20℃~ +40℃
Cooling Method	Air cooling force, fan speed is automatically adjusted by the internal temperature
Humidity range	0%~85% (NC)
Work Altitude	≤4000m
Interface and appearance
Terminals	TC series fence type wiring
Color	Yellow
Display	LCD
Language	English
Data communication	GPRS/RS232/R485(Optional)
Protection Level	IP20 [Indoor]
Noise [dB]	<30
Mounting	Wall mounting type
Dimensions (WDH) [mm]	250250110
Net Weight	3kg


1000-12000w inverter	General Type Inverter	Three Phase UPS	Lead-acid Batteries