Product Details

Specifications

Horizontal balancing machine
for Small rotors and complete assemblies
Complete workplace
designed for standing or seated

Horizontal balancing machine for Small rotors and complete assemblies

Small rotor balancing machine

Complete workplace designed for standing or seated operator
Highest balancing accuracy through super-critical support pedestals and digital meaurement processing
Short change-over times, simple and safe operation
Modular design for various applications

Range of application on this balancing machine

Universal balancing machines R1B is especially suitable for verysmall work-pieces such as small armatrues, miniature ventilators andcomplete assemblies, when high balancing tolerances at high speed mustbe achieved. They are used in small production lots as well as researchand development applications.

They can be used at varying locations and the change-over for other rotor types is possible in a short time.

Design

Displacement measuring, horizontal balancing machines of tabletopdesign for standing or seated opertor with semi or fully automaticoperating sequence.

If the machine is to be used for assemblies, the two supportpedestals are connected by a frame. An adapter and clamping arrangementis mounted onto this frame for supporting the rotors.

The drive canbe by tangential, under slung, over slung, compressed air or, in caseof complete assemblies, by an integrated supply for self-drive.

Product parameters

rotor weight W

Occasional overload permitted up to

provided the rotor weight is equally shared between the two bearings, i.e. per bearing pedestal

Max.

6 kg

10 kg

5 kg

Rotor weight

(as long as an accommodation of the rotor is possible due to thegeometric data and the minimum achievable residual unbalance issufficient for the balancing task.)

Min.

unlimited

distance between bearing centers

(500 mm length machine base)

distance between bearing centers with belt drive

Max.

Min.

400 mm

15 mm

36 mm

rotor swing diameter above the machine base

rotor swing diameter within the motor range

Max.

360 mm

150 mm

journal bearing diameter

Max.

Min.

22 mm

8 mm

Belt driving diameter

10-150 mm

Balancing speeds based upon 40 mm belt driving diameter approx.

(With other belt driving diameters, the speeds change accordingly.In addition, the speed range of the measuring unit must be taken intoaccount. See item 2)

280 2 850 rpm

Wn²-value for permanent calibration

W·n² = 50·10⁶kg/min²

Minimum achievable residual unbalance (U_mar)

but not better than (MARU)

0.1 gmm/kg

According to item 2

Unbalance reduction ratio (URR)

≥ 95%