Specifications

Schenck Balancing Machine
for crankshafts
balancing crankshaft

Balancing machine for crankshafts

Modular construction
Integral drilling station with linear guide mechanism
Software controlled display of drilling depth, tolerance calculation and indexing aid
High-performance CAB700 or CAB803 measuring instrumentation

Product Specification
Range of application

CS30 crankshaft balancing machinery are conceived in particular forlow-volume production and overhaul shops. The CS30 is a hard-bearingmachine with permanent calibration. This means that a new rotor can bemounted easily and balanced after entering only a few geometrical rotordata.

The integrated measuring instrumentation directly displaysunbalance with amount and angular position, depending on the initialunbalnce of the rotor.

CS30 balancing machinery are suitable for rotors weighing up to700kg. A powerful underslung belt drive ensure short accelerationperiods for short balancing cycles. The machiness compact and sturdydesign concept provides for a small footprint.

CS30 balancing machinery can be used with the CAB700 or CAB803measuring instrumentation and can also be equipped with a reportprinter.

A further advantage of the CS30 balancing machine lies in its areauniversal applicability. The machine is also suitable for other rigidrotors provided that they do not exceed the geometrical limits of themachine.

Unbalance correction is performed directly on the CS30 by a highperformance drilling unit. There is therefore no need to remove thework-piece from the machine and install it on a separate correctionunit.

Product parameters

Technical data at a glance     CS30   Machine       Measuring unit     CAB700   Length of machine bed   mm   1500   URR     95%   Umar   gmm   10   Bearing pedestal distance   mm min.   70   Bearing pedestal distance with belt drive   mm min   120   Distance between correction planes   mm max.   800   Max. drill diameter   mm   16   Rotor       Length   mm max.   1100   Weight   Kg max.   680   Diameter above machine base   mm   400   Main journal diameter   mm   10-80   Drive system       Spindle speed   rpm   230/510/1300/2850   Balancing speed   rpm   160-1600   Power   kVA   0.75