SORBO Wholesale Most Powerful Rechargeable Camping Light Emergency LED Camping Handheld Lantern with ABS
Negotiable /Piece
Min.Order:3000 Pieces
Wenzhou Shengbo Technology Co., Ltd.
SB-6025 SORBO Wholesale Most Powerful Rechargeable Camping Light Emergency LED Camping Handheld Lantern with ABS
1.CE+RoHS+BV+GMC
2.High quality+Competive price
3.Service of ODM & OEM
4.SAMPLES are available before order
Hot Selling Products:
Working Principle
This product adopts the principle of cranking for power generation. Cranking the handle to drive the generator to generate alternating current by professional designed driving gear. Then changing the alternating current into DC after commutating and voltage stabilizing which to charge its built-in battery.
Rotating handle design, this product can be used as camping lantern and spotlight.
Function & Feature
1. High brightness 3 LEDs for spotlight, 10 straw-hat lights and 5 red flash lights for camping lantern.
2. Cranking for power generation
3. Charge the product with external 5 V power source.
4. Cranking for power to charge mobile phone or digital products.
5. Rotating Dual purpose handle design.
6. With hanging handle and USB cable storage box.
7. Perfect combination of the light weight and high efficiency. Low noise and long lifespan.
Main Technical Parameters
Lighting : | |
The Max. luminous flux of spotlight | 18Lm |
The Max. luminous flux of lantern | 32Lm |
3-LED spotlight lighting time after 1 minute cranking | 15Min |
10-LED lantern lighting time after 1 minute cranking | 6Min |
5-LED red flashing time after 1 minute cranking | 120Min |
3-LED spotlight lighting time after being fully charged | 5.5Hr. |
10-LED lantern lighting time after being fully charged | 2Hr.15min |
5-LED red flashing time after being fully charged | 30Hr. |
Note: Lighting time testing standard is brightness down to 5% of open time's brightness. | |
Parameters of external power source | |
Input voltage/current | 5V/500mA |
Fully charged time by external power | 6Hr. |
Parameters of charging for digital devices: | |
Output no-load voltage | 5.5±0.2V |
Output Max. current | 400mA |
Main parts life-span | |
The whole unit | ≥5 Years |
The plastic part | ≥5 Years |
Others: | |
Specification of built-in battery | 300mAh, 3.6 V |
Motor | 2.5W Brushless |
Operation Method
1. Lighting:
1). Switch models: Spotlight→ Lantern →Red Flash→ off.
2. Charging operation:
1). Charge its inside battery: hold the unit and crank the handle by the other hand at the speed of 3 circles per second to charge its inside battery. (Charge indicator will glow)
2). Charged by external power souce: plug in the 5V external power or connect computer via mini USB port to charge the product, the red indicator will glow while charging.
3). Cranking for power to charge digital products: charge mobile phone or other digital products via USB cable.
3. Rotating handle:
Hold and press the cylinder-shaped button on handle side and rotate the handle vertically. Then release the button fixed.
Cautions
1. Don’t point at eyes directly so as not to hurt the eyes.
2. Pay attention to the holding gesture when cranking which can protect your finger and nail from hurting. Keep rotating steadily.
3. In order to assure the using life of the battery and the mechanical parts, please pay attention to the instructions below:
a) Do not crank it for more than 5 minutes when the power of the battery is enough (lighting normally) and less than 10 minutes when it runs out of power.
b) When the light is dim, it means the battery is lack of power badly, please turn off the light or crank it for a while.
c) Cranking it as even as possible (keep rotating steadily). Too slowly cranking would make current weak and influence the charging effeciency, too violent cranking possibly damage the driving system.
d) In order to prolong the lifespan of the battery, you should crank it for at least one minute once a month.
4. Do not place this product in which temperature or humidity is high. Do not drop or hit this product.
5. Turn off the light when charging in order to enhance the efficiency of charging .
6. The product will be a little hot if cranking for a long time.
7. We do not give notice again if the parameter of this product changed.
8. We reserve the final right to interpret this product.
.
1. Factory standard packaging is gift box, 50pcs for a carton.
Packaging can do as your request.
2. By sea FOB Ningbo or Shanghai
By air (DHL,TNT, DPS and so on)
1. OEM or ODM
2. Factory Price
3. High-end Desigh Package. Our own designer can help you design the packaging for free.
4. Fast Delivery. Deliver day is 15 days to 28 days (depend on inventory)
5. 100% QC inspection before shippment
6. Full Refund or Replacement for Qaulity Faulty
7. One Year Warranty