Product Details

gps tracker vehicle speed limiter car speed limiter T01

Product Function:

No	Function Name	Function Specification
1	Remote monitor function	Real-time monitor :GPRS online,real-time checking current track point
		Real-time: fixed time return,return current GPS information in fixed interval.
		Fixed-distance monitor: fixed distance return,return current GPS data in fixed distance.
2	Remote control stop oil	Remote control supply/stop oil
3	Accident doubt point data	Accident doubt point data: remotely collect the last 10 seconds, the real-time vehicle's running speed value and brake status before every 20 seconds parking, collect one data every 0.2 seconds.
4	Parameter setting and checking	Remote parameter set and check: vehicle recognize code vehicle NO.,vehicle classification,driver's code, driver's license No.,characteristic parameter.
5	Status record	The terminal record the vehicle's driving status in 360 hours use<=1 minute as the interval.
6	Mileage Statistics	Electronic mileage:the terminal caculate the driving mileage by the vehicle speed sensor.
7	ID Record	Use IC card to record the driver's code and driver's license code to identify and record the ID.
8	Fatigue driving	Check whether the current driving achieve to the fatigue driving threshold value, and will have fatigue alarm
9	Printer function	Print the average speed, vehicle information(include vehicle No.,driver’s code,driver license No.,print time etc) in 15 minutes when in parking status,
10	SMS	The monitoring center can send SMS to the driver
11	Listen-in	The center can monitor the voice information in the car
12	Hands off Voice communication	The terminal dial : Driver can dial telephone number by terminal preserved number
12	Hands off Voice communication	Pick up phone: can pick up the call from the center
13	SOS alarm	SOS function ,driver can use this function when in emergency situation
14	over speed alarm	Set the over speed alarm to the designated vehicle, if the driving speed over this value, it will alarm
15	power-save function	Into the preset save time, auto-shut down GPS function, it will auto-start when there is emergency
16	Blind area added upload	when in blind area, auto-save GPS information(1000pcs),auto-upload when leave blind area.
17	Remote-reset	the monitor center can remote reset the cat terminal
18	self-checking	when the terminal power on, it will auto-checking working status and send the self-checking information.
19	Alarm hint	3 ways to choose:1. Buzzer,2.TTS;. 3.Buzzer+TTS

Product Features:

Ø A U disk could set parameters and collect data from several dozens or even tens of vehicles, which greatly reduces work loads.

Ø Buttons are film-based, with good quality and long life span. Arrangement of button layout is reasonable, checking data could be done by double clicking on buttons.

Ø MCU adopts 32-digit chip, with faster speed and higher efficiency, users do not have to wait for data input and output.

Ø High-quality ferroelectric memory is adopted for data storage, with low power consumption, rapid reading and unlimited writing.

Ø Large LCD is adopted for displaying 4 lines of 32 characters. The interface is wholly Chinese, without checking computers for over-speed records, fatigue records and average speed 15min before parking.

Ø The pre-set embedded GPS interface, which does not seize RS232 interface without paying any fees, the track of vehicle is clear.

Details:

Factory:

Certificates: