Specifications
Mild steel up through 3.5mm(10gauge); Punch mild steel,aluminum,fiberglass and plastic.Round knockout Punches (Type C)
SPECIFCATIONS
Capacity: Mild steel up through 3.5mm(10gauge);
Application: Punch mild steel,aluminum,fiberglass and plastic.
Operation:Battery, hydraulic,ratchet or manual drivers.When used with ratchet, hydraulic or battery driver, buy the punch and die only; the draw stud is part of the driver kit
Round Manual Knockout Punch Kits (Type C):
DESCRIPTION CAPACITY | ||
| mm | GA |
1/2”-11 /4” Conduit Size | 3.5 | 10 |
11 /2”and 2” Conduit Size | 3.5 | 10 |
1 /2” and 2” Conduit Size | 3.5 | 10 |
Type C 1/2”-1/4”Knockout Punch Kit lncludes:
DESCRIPTION HOLE SIZE(ACTUAL) | ||
| diameter(INCH) | Diameter(mm) |
1/2”Conduit Size Punch&Die | 7/8”.885 | 22.50 |
3/4”Conduit Size Punch&Die | 1.115 | 28.30 |
1” Conduit Size Punch&Die | 1.362 | 34.60 |
11/4”ConduitSize Punch&Die | 1.701 | 43.20 |
3/8”,24 UN Draw stud with beaing | ||
3/4”,16 UN Draw stud with beaing | ||
Plastic box | ||
Type C Manual Knockout Kits 11/2”-2” lncludes:
DESCRIPTION HOLE SIZE (ACTUAL) | ||
| diameter(INCH) | Diameter(mm) |
1-1/2”Conduit Size Punch&Die | 1-15/16 | 49.6 |
2” Conduit Size Punch&Die | 2-3/8 | 61.5 |
3/4”,16 UN Draw stud with beaing | ||
Plastic box | ||
Type C 1/2”-1/4”Knockout Punch Kit lncludes:
DESCRIPTION HOLE SIZE (ACTUAL) | ||
| diameter(INCH) | Diameter(mm) |
Ratchet wrench-1” Hex |
|
|
1/2”Conduit Size Punch&Die | 7/8”.885 | 22.50 |
3/4”Conduit Size Punch&Die | 1.115 | 28.30 |
1” Conduit Size Punch&Die | 1.362 | 34.60 |
11/4”ConduitSize Punch&Die | 1.701 | 43.20 |
11/2”ConduitSize Punch&Die | 1.951 | 49.6 |
2” Conduit Size Punch&Die | 2-3/8 2.416 | 61.5 |
3/8”,24 UN Draw stud with beaing |
|
|
3/4”,16 UN Draw stud with beaing |
|
|
Plastic box |
|
|