china manufacturer supply Z145 series jolt squeeze moulding machine
USD $2,000 - $25,000 /Set
Min.Order:1 Set
Qingdao Huachuan Machinery Co., Ltd.
china manufacturer supply Z145 series jolt squeeze moulding machine
Z145 series jolt-squeeze stripper moulding machine,
1.Optimal design of the structure, the fuselage of the machine adopt the square chest and frame structure, so it can significantly increase the rigidity of the fuselage!
2.The machine adopt the jolting technology, so it can significantly increase the compressive stress to make the hardness up to HB90 and upgrade one level about the surface roughness, so it can guarantee the quality
3.The shock part of the machine is buffer spring, so it can effectively reduce the impact to foundation
4.The pattern drawing mechanism adopt the drawing by the single cylinder, so it has a excellent synchronism
5.The control part, it adopts all pneumatic components to achieve the global function, simple operation and convenient to maintenance.
6.The machine is convenient to operate, it is visual about the sand mould, human operation, so it is effective to increase the productivity
The Jolt Squeeze Stripper Moulding Machine is suitable for batch production of single sided pattern plate and single flask moulding of small castings,can make cope flask and drag flask.
The Jolt Squeeze Stripper Moulding Machine own simple air control system,easy operation,flexible use and convenient repair and maintenance.
The Jolt Squeeze Moulding Machine Work Technical Parameters
Item | Unit | Z145 series |
Max dimension of flask | mm | 800×630×320 |
Worktable dimension | mm | 900×730 |
Air pressure | Mpa | 0.6 |
Compressive strength | KN | 120 |
Jolting load | KN | 5.5 |
Compacting stroke | mm | 195 |
Draw stroke | mm | 320 |
Distance between worktable to pressure head | mm | 350-680 |
Productivity | Mould/h | 40-60 |
The Jolt Squeeze Moulding Machine Work principle
The worktable fall and collide with floating shock-iron,and the sand was tighted slightly, and then to compaction,get the top and bottom of sand mould are tight. The slightly shock is high frequency (500-1000 times/min), small amplitude (5-25 mm) vibration instead of low frequency (60-120 times/min), the large amplitude vibration. This kind of moulding machine made of sand mold are good quality, the basic requirement is also lower.
our factory :
with ourcustomers;
certifications
We can design product according to your demand. Our molding machine have stabile performance , good quality and reliable service. We allow a proper discount according to the quantity you order.If you have any question, pls dont feel any hesitate to ask me, i will try best to meet your demand,It'smake our company great honour . Before the New Year to buy our machines all have discount , it will reduce the cost for you.