Ultrasonic handheld type light oil flow meter
USD $301 - $5,000 /Set
Min.Order:1 Set
Kaifeng Qingtianweiye Flow Instrument Co., Ltd.
Ultrasonic handheld type light oil flow meter
The ultrasonic flow meter is designed to measure the fluid velocity of liquid within closed conduit. The transducers are a non-contacting, clamp-on type, which will provide benefits of non- fouling operation and easy installation.
0.5% of linearity | 0.2% of repeatability |
Bilingual interface in Chinese and English | 4-way flows totalizers |
Transmission and receipt patents of balanced lower-voltage and multi-pulse | Built-in date totalizers |
Built-in data logger | Good anti-interference performace |
0.5 second totalizing period | 100 Pico-second resolution of time difference measurement |
Linearity | 0.5% |
Repeatability | 0.2% |
Accuracy | ±1% of reading at rates>0.2mps |
Response | 0-999 seconds |
Velocity | ±32m/s |
Pipe Size | 15mm-6000mm |
Rate Units | Meter,Feet,Cubic Meter,Liter,Cubic Feet,USA Gallon,UK Gallon, Oil Barrel,USA Liquid Barrel, UK Liquid Barrel; |
Totalizer | 7-digit totalizers for net accumulation and positive and negative accumulations |
Liquid Types | all liquids |
Security | Locks of Set values, you have to unlock while changing data; |
Display | 4x8 Chinese or 4x16 English letters |
Communication Interface | RS-232C,baud-rate :from 75 to 57600.Protocol made by the manufacturer and compatible with that of the FUJI ultrasonic flow meter. |
Transducers | Model M1 for standard,other 3 models for optional |
Transducer Cord | Standard 2x5 meters,optional 2x10 meters |
Power Supply | 3AAA Ni-Hbuilt-inbatteries.When fully rech arged it will lastover 10 hours of operation. |
100V-240VAC for the charger | |
Data Logger | Built-in data logger can store over 2000 lines of data |
Manual | 7-digit press-key-to-gototalizer for calibration |
Housing | ABS |
V-method installation is the moswidely used mode for daily measurement with pipe inner diameters ranging from 15 millimeter to 200 millimeter. It is also called reflective mode or method.
Z-method is commonly used when the pipe diameter is between 300 millimeters and 500 millimeters.
W-method is usually used on plastic pipes with a diameter from 15 millimeters to 100 millimeters