Sterilizer is a fully automated system which utilizes dry heat by means of forced convection of filtered air, through high efficiency particulate air filter to achieve sterilization and depyrogenation of washed empty pharmaceutical glassware used of parentral product packing. Continuous dry heat sterilizer ensures the glassware to exposed for depyrogenation temperature. The time required for the necessary reduction in endotoxins which at bare minimum is LOG 3 at rated output.

The Sterilization Depyrogenation cycle is based on selection of cycle times and exposure of temperature that will sterilize or depyrogenate the glassware to an acceptable low probability level of contamination, without adversely affecting the critical parameters of the product.

Generally Heat destroys micro organisms. The destruction process of microorganisms is a function of time and temperature. The rate of destruction is linear logarithmic, means in a given time interval and at a given temperature, the same percentage of the bacterial population will be destroyed. Hence forth introduce Forced Conventional Dry Heat Sterilizer (Sterilizing Tunnel).

The Forced Conventional Dry Sterilizer consists of Drying Zone to raise the temperature of the glassware and evaporate the wash water from the glassware. The Sterilizing Zone sterilize the glassware at 3500C (approx.) and the third section consist of cooling & sterilizing zone to restore the glassware temperature to ambient