Product Details

remote type magnetic flow transmitter

Technical Performance Parameters
Caliver	DN3~DN3000mm
Nominal Pressure	0.6~4.0MPa(special pressure can be made to)
Accuracy	±0.5%,±0.3%or±0.2% are selectable
Liner material	Teflon,PFA,F46,Neoprene,Polyurethane
Electrode Type	General type ,scraper type and replaceable type
Electrode material	Stainless steel SUS316,Hastelloy C,Titanium,Tantalum Platinum-iridium,Stainless steel covered with tungsten carbide
Medium Temperature	Integral type	-20°C~+60°C
	Remote type	Neoprene & Polyurethane Liner	-10°C~+80°C
		PTFE Liner /PFA Liner /F46 Liner	-10°C~+160°C
Ambient Temperature	-25°C ~+ 60°C
Ambient Humidity	5~100%RH(relative humidity)
Medium Electrical conductivity	≥20μ s/cm
Measuring Range	1500:1,flow rate<15m/s
Structure type	Integral type,remote type,submersible type,ex-proof type
Protection Class	IP65,IP68(optional)
Ex-proof Mark	ExmdⅡT4
Product Standard	JB/T 9248-1999 Electormagnetic Flowmeter

Main performances of the lining materials
Lining material	Main Performance	Applications
Teflon	1.The most steady material in plastics which is resistibal to boiling hydrochloric acid,vitriolandqua fortis as well as strong alkali and organic impregnates. 2.Not be perfect in abrasion resistance.	Strong corrosive mediums such as strong acid and alkali
PFA	Having the same abrasion resistance with PTFE.Having strong ability of load pressure resistance.	Applicable in state of load pressure
F46	1.Have the same abrasion resistance with PTFE.2.Resistable for low abrasion.3.Having strong resistance to load pressure.	1.The same as PTFE.2.Applicable in mediums of low abrasion.
Neoprene	1.Be of good elasticity,retractility and abrasion resistance.2.Be resistant to low aicd,alkali and salt but not for oxidation mediums.	Water,sewage and slurry,mineral serosity of low abrasion.
Polyurethane	1.Be of good abrasion resistibility.2.Not be perfect in acid/alkali resisitance.3.Can't be used for water mixed with organic impregnants.	Applicable in mineral serosity,slurry and coal slurry of high abrasion.

Main performances of the electrode materials
Electrode material	Applications
Stainless steel SUS316	Applicable in water,sewage and corrosive mediums.Widely used in industries of petrol,chemistry,carbamide,etc
Stainless steel covered with tungsten carbide	Applicable in mediums of no corrosive and low abrasion.
Hastelloy B(HB)	Having strong resistance to hydrochloric acid of any consistance which is below bioling piont.Also resistable against vitriol,phosphate,hydrofluoricacid,organic acid etc which are oxidable acid,alkali and non-oxidable salt.
Hastelloy C(HC)	Be resistant to oxidable acid such as nitric acid,mixed acid as well as oxidable salt such as Fe+++,Cu++and sea water
Titanium	Applicable in seawater,and kinds of chloride,hypochlorite salt,oxidable acid(including fuming nitric acid),organic acid,alkali etc.Not resistant to a pure reducing acid(such as sulphuric acid,hydrochloric acid)corrosion.But if acid contains antioxidant(such as Fe+++,Cu++)is greatly reduce corrosion.
Tantalum	Having strong resistance to corrosive mediums that is similar with glass.Almost applicable in all chemical mediums.Except for hydrofluoric acid,oleum and alkali.
Platinum-iridium	Almost be applicable in all chemical mediums except for aqua fortis,ammonium salt.

Packaging & Shipping

We have established nice relationship with so many expresses,such as DHL,Fedex,TNT etc.

We sure that your products will get the best protection,and we will send to you hand with the

fastest speed.For sure that electromagnetic flow meter would not damaged by nature factors,we package it by wooden case if Diameter is larger than 150mm,or use carton.

Our Services

From the raw material to the finished production we have the very strict and serious procedure to guarantee our products get to the different quality requirements to provide our customers high quality products, first-class service. The sale of products provides 12-month warranty and lifetime tracking service.

Company Information

We are Kaifeng Qingtianweiye Flow Instrument Co., Ltd,a subsidiary of listed company Henan SunTront Tec Co.,Ltd.Our head office is a listed company since 2011 and its main products is intelligent electricity meters,while Our company mainly engaged in electromagnetic flow meter.

The total area of our company is 15000 square meters,and the building area is 6000 square meters.Our company have five utility model patents,three software copyrights.And we also have production qualification and liquid calibration settings for flow meters from Dn25mm to DN2000mm.We have strong R&D capability.Our company and our head office have large quantity of running water industrial users,and we also have strong marketing capabilities on battery powered electromagnetic flow meter.We are expecting to cooperate with manufacturer who can provide battery powered flow converter,or through expand cooperation in various modes.To develop the Chinese market and international market of battery powered flow meter together.To learn from each other and to achieve win-win situation.

We are expecting sincere cooperation.If you have interest,please feel free to contact us at any time.We are looking forward to hearing from you.