Product Details

carbide wire drawing nibs and die blank for different sizes carbide mould

Product Description

[picture of carbide wire drawing nibs and blank]

[features of carbide wire drawing nibs and blank]

Tungsten carbide drawing dies are used in wire drawing industries for drawing of different materials like Mild Steel (M.S), High Carbon (H.C), Stainless Steel (S.S), Brass, Aluminum, etc.

All major wire producers use tungsten carbide drawing dies.

[grade of carbide wire drawing nibs and blank]

cemented carbide grade for wire drawing dies blank

Grade	Density(g/cm3)	Hardness(HRA)	TRS(MPa)	Applications recommended
YG6X	14.95	91.5	1800	For drawing steel and nonferrous wires or bars of less than 6.00mm under not so much stress.
YG6	14.95	90.5	1900	For drawing steel, nonferrous alloy bars of less than 20.00mm under more stress and also for drawing tubes of less than 10.00mm.
YG8	14.8	89.5	2200	For drawing steel and nonferrous bars and tubes, also for manufacturing mechanical parts, tools and wear parts.
YG10	14.5	88.5	2400
YG15	14.0	87.0	2800	For drawing steel bars and tubes with a high reduction rate and for manufacturing anvils, drilling and punching and impacting.

for more information about carbide wire drawing nibs and blank,

contact:

Sales: Ms.Bigel Wu
Skype: haocarbide
Tel: 86 731 22031856
Mob: 86 15273315755
Email: bigel(at)