Product Details

10x4x3mm tungsten carbide tile cutting blade

[Discrible of tile cutting blade ]

1. Name: tile cutter, tile cutting wheel.Tungsten carbide tile cutter

2. Material: tungsten carbide, cemented carbide, tungsten steel. tungsten alloy.

3. Grade: K20 K15, YG6,YG8. or as your request.

4. Usage: cutting tile

[Size of tile cutting blade ]

size of tungsten carbide tile cutting wheel

type	out dia(mm)	tol(mm)	inner hole dia(mm)	tol(mm)	thickness(mm)	tol(mm)	cut angle
φ22xφ6x4.7	22	±0.2	6	+0.1/-0	4.7	+0/-0.1	90°100°110°120°
φ22xφ6x2.0	22	±0.2	6	+0.1/-0	2	+0/-0.1	90°100°110°120°
φ22xφ10.5x3	22	±0.2	10.5	+0.1/-0	3	+0/-0.1	90°100°110°120°
φ22xφ10.5x2	22	±0.2	10.5	+0.1/-0	2	+0/-0.1	90°100°110°120°
φ20xφ5x3.0	20	±0.2	5	+0.1/-0	3	+0/-0.1	90°100°110°120°
φ20xφ5x2.0	20	±0.2	5	+0.1/-0	2	+0/-0.1	90°100°110°120°
φ18xφ6x3.0	18	±0.2	6	+0.1/-0	3	+0/-0.1	90°100°110°120°
φ18xφ6x1.5	18	±0.2	6	+0.1/-0	1.5	+0/-0.1	90°100°110°120°
φ16xφ6x3.0	16	±0.2	6	+0.1/-0	3	+0/-0.1	90°100°110°120°
φ16xφ6x1.5	16	±0.2	6	+0.1/-0	1.5	+0/-0.1	90°100°110°120°
φ15xφ6x2.0	15	±0.2	6	+0.1/-0	2	+0/-0.1	90°100°110°120°
φ15xφ6x1.5	15	±0.2	6	+0.1/-0	1.5	+0/-0.1	90°100°110°120°
φ12xφ3x3.0	12	±0.2	3	+0.1/-0	3.0	+0/-0.1	90°100°110°120°
φ12xφ4x2.0	12	±0.2	4	+0.1/-0	2.0	+0/-0.1	90°100°110°120°

[ Features of tile cutting blade ]

1. Tungsten carbide tile cutter is environmentally friendly, be with no noise pollution and is

quick and simple for operating when compared to tradition cutter

2. carbide as material, it is with excellent wear-resistance and longer service life

3. HAR≥89.5,sharp cutting edge and high work efficiency

[Picture of tile cutting blade ]

Our Services

[How tile cutting wheel produced]

Carbide production / Blanks
Carbide is a composite material consisting of particles mainly with tungsten carbide as hard material and

a metallic binder.For this reason, with carbide it is possible to achieve hardness and toughness combinations

which can’t obtained with other materials .

Powder Production
Due to its high melting point tungsten carbide (WC)can only be produced through sintering when needed

for technically sophisticated applications . For this purpose , the powder consisting of the tungsten carbide,

the cobalt binder and sometimes additional alloys is mixed , milled and spray-dried .
This process results in a spray-dried granulate which can easily be used for production,since its chemical

and physical properties have already been adapted to the final carbide specification .

Ready to press powder
Manufacture of carbide blanks
By applying pressure the carbide powder is converted into a blank .The material will receive its near

net shape througt the application of traditional machining methods( sawing ,drilling,milling , turning ),

so that extended machining of the sintered carbide blank is no longer necessary.

The density of the blank is approx.50% of the sintered carbide ‘s density which leads to an

approx.20% shrinkage in length.

Sintering

The sintering process converts the blank into a homogeneous piece of carbide with a high degree

of hardness .When sintering hard metal (usually at a temperature of approx.1400 c ), this process

is called liquid phase sintering. In this case ,the binder (e.g. cobalt ) melts and wets the WC hard

material particles .After sintering, the density of the carbide is almost , or even precisely, the same

as the theoretical density. Any residual porosity which occurs after the sintering procedure may

be removed through an ensuring HIP process .

[Produce equipment of tungsten carbide tile cutting wheel]

for more information about 10x4x3mm tile cutting blade , please contact:

Ms Bigel Wu

Addr: world trade plaza,xinhua west road,hetang district, zhuzhou,hunan, China
Zip: 412000
Tel: 86 0731 22199683
Fax: 86 0731 28260602
Mob: 86 152 73315755
Skype: hao-carbide