Product Details

Specifications

1.Adhesive:silicon
2.Rated Voltage: 6kv
3.Tensile Strength: 120
4.Certificate: ROHS
5.Temp.260c

Description:1)This tape is with polyimide film as the basic carrier, and coated with pressure sensitive silicone adhesive, and combined with fluorine release film.

2) The discs can be removed from the liner very easily after die-cutting.

3) It can endure high temperature up to 260°C

4) We can make different shapes and sizes according to the customers’ requirements.

Polyimide Masking Discs - 1/2"(1/4,3/4,3/8....)

Polyimide masking discs, also called Low static Kapton® masking discs, are mainly utilized in circuit board creation, wave soldering as well as other uses in which static charge is really a challenge. Low static masking discs contain silicon adhesive, which result in zero deposits. Masking discs can endure temperature ranges as much as 500°F/260°C. Kapton® is a registered trademark of DuPont.

Core: 3"
Standards: MIL SPEC MIL-P-46112 Type I
Roll: 2000
Width: 1 MIL
Adhesive: 1.5 MIL

APPLICATION IDEAS:

Mask for protection of gold fingers of printed circuit boards during wave solder or solder dip Widely used for electrical insulation on transformer, motor, coils, PCB making and so on.

Color

Adhesion Type

Backing Thickness (mils/mm)

Total Tape Thickness (mils/mm)

Adhesion to Steel: N/25mm

Tensile Strength (N/25mm)

Elongation: %

Dielectric Strength, volts

Insulation Class, centigrade

Temperature Resistance

Resistance to: acids, oils, solvents

Amber