Specifications
Fiberglass dry wall stainless steel angle bead with metal corner for buliding/constructuion material
Thickness-0.3,0.35mm
Fiberglass dry wall stainless steel angle bead with metal corner for buliding/constructuion material(China
Factory&Manufacturer)
1. classify
According to the material can be divided into:
PVC Angle Bead
1) Include heat preservation angle bead,heat preservation water drip, external corner
square staff, internal corner square staff, flexiblecorner square staff, fill stitches, dividing strip
2) Its mainly used for heat preservation and indoor and outdoor decoration, heat preservation is mainly
used for Angle and eaves construction insulation board, indoor and outdoor decoration mainly solve the
long existing in the construction of Yang Angle is not straight, not beautiful, the common quality faults
such as corner is easy to damage. On the outer wall heat preservation processing, construction speed is
slow, the corner of the impact resistance is poor, after long time of weathering, water seepage, result in
the crack of the wall. Now friends sheng insulation protect horn using this product will complete solution
PVC bead web album Above all wall quality issues and project completion of difficult problems, ensure
insulation mortar layer without cracking, and PVC bead and glass fiber mesh cloth sewing, acid and alkali
resistance can also improve the level of shock, reduce the earthquake disaster.
Metal Angle Bead
1) Inclded seine angle bead, perforated angle bead, Plaster stop network
2) 1. the metal bead double-sided adopts high quality galvanized material, prevent aging, decay
resistance refractory, effectively prevent rust.
2. the size of the metal article kok accurate acute Angle design, avoid the edge hit when the
concentration of stress and external force is evenly dispersed to around the edges, effectively protect
Yang Angle is in good condition. Article
3. the metal bead divide into two kinds, punching and expansion is not only convenient nailing and make
article kok and marginal parts of the gypsum board or other adhesive materials with more solid. Article
4. metal corner corner construction without having to depend on wood board, the primary lath can also
make a perfect corner line, shorten construction time, effectively reduce the construction cost.
2. Characteristics
1). Change the traditionally by hand or using simple tools to trim Angle of inside and outside the wall fan ash
method, without using the foot board, in use process need to protect horn network with putty screeding of
fixed to the first corner, and then painting the corner of the room, it is easy to operate, simplify construction
procedures. Reduce the construction cost, a few times to improve the efficiency of construction. And it can
reduce the technical requirements of construction personnel, general construction personnel can be well
the original technical requirements for high work well.
2). The anti-collision ability strong, can prevent the construction personnel in construction time run into the
corner, produce the gap. Effectively avoid the repeatedly repair by corner touch bad trouble. And building
in use process, after the completion of the corner of the anti-collision ability is enhanced, the general
impact does not produce gap. This will save a lot of after-sales service work. We all know that has
decorated the house if you want to repair the corner gaps, easy to produce off color. This greatly influence
the indoor general appearance. And PVC corner protector can protect the corner after the impact does not
produce the gap.
3). To solve the problems of the interior Angle of Yin and Yang is not straight. Edges are used in traditional
construction engineering cement bag ShaJiao manual construction method, is both time consuming and
consumables, slightly careless, vertical misalignment or metope is uneven. And protect horn network can
keep Yin and Yang Angle straight effect. Technical requirements of construction personnel so greatly
reduced, the general construction personnel can make the corner brush straight.
4). And can protect horn net with glass fiber grid cloth cover, on the inside and outside heat preservation can
effectively solve the Yang Angle is not straight, the rough, easily damaged the common fault of collision.
Can effectively increase the corner impact resistance, prevent corner cracking. Using thermal network
article kok will thoroughly to solve the problem above all wall quality and project completion of difficult
problems, ensure insulation mortar layer without cracking, and article plastic and glass fiber mesh cloth
high bond strength, acid and alkali resistance. Use of this product, but also improve the level of shock,
relieve earthquake disasters.
3. Application
It can be formed in the plaster on the ridge of engineering straight resist rupture, or crack, and protecting
and reinforcing mortar, the most vulnerable part of its wings can be in any one side of the ridge firmly
anchor into the entire depth of the plaster. Kok network for mortar plaster is very important, because
construction of construction and completion of the stucco corner when using the most easy to damage, and
because of its easy construction can save a lot of time.
4. regular size
Material: galvanized sheet stainless steel aluminum copper PVC fiber mesh cloth
Length: 2-3 meters
The two wings width: 25 * 25 21 * 21 30 * 30
The number/box of 50, 100, 300
5. construction method
1). Metal angle bead construction method
1. the first article of the metal corner cut to desired length, and adhesive plaster daub in Yang Angle to
bonding metal protect horn, or directly in the Yang Angle with screws. Article
2. The metal bead along Yang Angle paste to joint sealant, strong and gently squeeze the binding. Each
side cover 100 mm width of joint sealant, stay dry.
3. the second joint sealant gently with sand paper burnish joint sealant surface after drying.
4. apply the third layer joint sealant about 200 mm wide on each side.
2). PVC angle bead construction method
1. Check the corner of the vertical degree and the roughness of metope, found that the error is too big,
should wipe out the bumps, uneven sag.
2. Making ZhuanYongShui mud: will white cement mixed with wood glue in a ratio of about 3:1 stirring, adding
the right amount of old powder and 801 glue, stir to mix well.
3. Use ZhuanYongShui mud screeding corner and metope, slurry to keep appropriate thickness.
4. Will protect horn, clingy corner slurry overflows from the punching advisable; If considering
strengthening fastness, Christine proposal with nails fixed them. Then, the overflow punching slurry
gently smoothing.
5. A little dry, then brush a layer of professional pulp and erased.
6. After natural drying, generally to 48 hours or so, in case of rainy season can be appropriately extended,
with sand paper burnish, slightly to brush a layer of putty powder.
7. In the end, or can choose to brush paint, paint.
Main Products: Wire Mesh Fence ,Chain Link Fence ,Temporary Fence ,Welded Mesh Panel ,Razor Barbed Wire
Business Type: Manufacturer,Trading Company
Hengshui Hebei China
Facebook
X
Pinterest
Linkedln