Specifications

1.Hot Air Banner and PVC welding machine
2.Use leister gun
3.High qualiry , high speed , automatic
4.Delivery fast

Leister Flex Banner Welding Machine  (ChunLei company Machine)

Product Description

The automatic welding machine is designed to weld plastic materials. The automatic welding machine can weld advertising inkjet fabric, inkjet cloth, light box cloth, cloth, mesh cloth, tarpaulin and other PVC, PE, DHPE, LDPE, EVA, Pp plastic materials that can be hot meltted.It is small, light and easy to operate

Technical data

Voltage	220V/230V
Frequency	50/60HZ
Power	1500W
Temperature	0-600 degree centigrade
Welding Speed	0-10m/min
Gross weight	20Kg
Welding width	10-50mm
Welding thickness	0.5-3mm
Packing size	50mm*30mm*35mm

Mainly btttons function

1.Set desired temperature

2.Turn on power of heat gun,then put temperature control knob to the maximum as shown

3.when start work,adjust walking speed and find suitable speed

4.Shutdown operation, put temperature control knob to the minimum or Switch off the heat gun. Then shut off main power supply when the PV value is less than 50 degree

     Operation steps

1. Make the cloth for seaming flat and put it underneath.Fix both ends by adhesive tape or something else
2. The overlap width of the two pieces is about 3mm, the width of the nozzle of hot seaming machine.
3. Put the machine nozzle between two overlap pieces.The press-wheel should be at left side of nozzle.The nozzle also need align with side of upper piece of cloth
4. Switch on the motor power and then adjust speed
5. Turn on the movement switch
6. Press heating power key to adjust temperature
7. Turn the bar by anticlockwise to fix the position to startup automatic movement.The machine will go along with the overlap path by itself
8. Turn the bar by clockwise to cease the automatic work
9. The operator should control the moving direction and make sure the nozzle connect both with upper and under piece of cloth

       Maintenance

1. Any part of this machine being bumped of fallen can cause some damage impossible to be repaired.So please pay attention to carry it.It is suggested to move the machine by manpower and put it down carefully
2. Please check if there is damage or missed parts after unpack the machine.Any problem, please contact us or the local agent immediately
3. The place for installation must be flat and the floor is strong enough to support the machine and moreover, the installation place should close to power supply
4. Keep the installation place no dust and avoiding sunshine
5. Please sweep away the anti-rust oil from the machine with detergent and re-lubricate with light lubricating oil after installation

Our company produce many different model welding/welder machine , such as model 4000L , model 3000LC , model 4000C , model 2000C and other high quality model . If you have any other questions about our machine ,please contact us .