CDMA800 33dBm mobile signal booster 2watts 800MHz signal amplifier low power indoor/outdoor cellular signal repeater booster
USD $1 - $999 /Set
Min.Order:1 Set
Quanzhou Kingtone Optics & Electronics Technology Co., Ltd.
f
CDMA800 33dBm mobile signal booster 2watts 800MHz signal amplifier low power indoor/outdoor cellular signal repeater booster
Packaging Details: thick box lined with foam for CDMA800MHz mobile signal repeater
1 pc/ctn for CDMA800MHz mobile signal repeater
Delivery Detail: within 20 days after all confirmed
Delivery Method: by air,land,sea or expression courier,such as DHL,Fedex,TNT,UPS,EMS etc.
CDMA800 33dBm mobile signal booster 2watts 800MHz signal amplifier low power indoor/outdoor cellular signal repeater booster
CDMA800 33dBm mobile signal booster 2watts 800MHz signal amplifier low power indoor/outdoor cellular signal repeater booster
CDMA800 33dBm mobile signal booster 2watts 800MHz signal amplifier low power indoor/outdoor cellular signal repeater booster is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
CDMA800MHz mobile signal repeater Technical Specification
2016 Kingtone 2G 3G mini CDMA transmitter CDMA800MHz mobile signal repeater 33dBm cellular signal repeater rf powerful repeater
| ||||
Items | Testing Condition | Specification | ||
Uplink | Downlink | |||
Working Frequency(MHz) | Nominal Frequency | 824 – 849MHz | 869 - 894MHz | |
Gain(dB) | Nominal Output Power-5dB | 95±3 | ||
Output Power (dBm) | GSM modulating signal | 33 | 40 | |
ALC (dBm) | Input Signal add 20dB | Po≤±1 | ||
Noise Figure (dB) | Working in-band(Max. Gain) | ≤5 | ||
Ripple in-band (dB) | Nominal Output Power -5dB | ≤3 | ||
Frequency Tolerance (ppm) | Nominal Output Power | ≤0.05 | ||
Time Delay (us) | Working in-band | ≤5 | ||
Peak Phase Error(°) | Working in-band | ≤20 | ||
RMS Phase Error (°) | Working in-band | ≤5 | ||
Gain Adjustment Step (dB) | Nominal Output Power -5dB | 1dB | ||
Gain Adjustment Range(dB) | Nominal Output Power -5dB | ≥30 | ||
Gain Adjustable Linear(dB) | 10dB | Nominal Output Power -5dB | ±1.0 | |
20dB | Nominal Output Power -5dB | ±1.0 | ||
30dB | Nominal Output Power -5dB | ±1.5 | ||
Inter-modulation Attenuation (dBc) | Working in-band | ≤-45 | ||
Spurious Emission(dBm) | 9kHz-1GHz | BW:30KHz | ≤-36 | ≤-36 |
1GHz-12.75GHz | BW:30KHz | ≤-30 | ≤-30 | |
VSWR | BS/MS Port | 1.5 | ||
I/O Port | N-Female | |||
Impedance | 50ohm | |||
Operating Temperature | -25°C ~+55°C | |||
Relative Humidity | Max. 95% | |||
MTBF | Min. 100000 hours | |||
Power Supply | DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%) | |||
Remote Monitoring Function | Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power | |||
Remote Control Module | RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery |
Installation Diagram
Main Features
1. High linearity PA; High system gain;
2. Intelligent ALC technology;
3.Full duplex and high isolation from uplink to downlink;
4. Automatic Operation convenient operation;
5. Integrated technique with reliable performance;
6. Bandwidth can be configured from 0.2-25MHz in work band.
7.Local and remote monitoring (optional) with automatic fault alarm &remote control;
8. Weatherproof design for all weather installation;
Applications
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
Indoor: Hotels, Exhibition Centers, Basements, Shopping Malls, Offices, Packing Lots etc.
It is mainly applicable to such case:
The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than -70dBm;
And can meet the requirement of antenna isolation to avoid self-oscillation.
At present,Kingtone exhibited the highest quality products and enterprise's comprehensive strength,and Kingtone continues to strengthen technological innovation on repeater products and will launch the new products on the market soon.With your supports and new requirements which can make us improve our service,innovative our technology and consummate the products.
OEM & ODM are welcome!
CDMA800 33dBm mobile signal booster 2watts 800MHz signal amplifier low power indoor/outdoor cellular signal repeater booster
Hong Kong Electronic Fair
Communic Asia
CDMA800 33dBm mobile signal booster 2watts 800MHz signal amplifier low power indoor/outdoor cellular signal repeater booster
Question: I live in a rural area. Rather than having a second phone line for work, I'd like to use my cell phone, but it only works outside. GSM 900 1800MHz dual band repeater,cell phone signal repeater,high quality repeater
Answer: Signals in many rural areas are marginal and cannot penetrate the walls of your home. Kingtone repeater can be easily deployed to provide coverage throughout your house. In a home, the donor unit is generally deployed outside – for example, under the eaves. Because it is more sensitive than your phone and is mounted higher up, it can usually detect signals that your phone can't. The coverage range of 15,000 to 50,000 square feet (2,000 to 4,600 square metres) is adequate for most homes.
Question: When I'm at the cottage, I'd like to stay in touch, but if I publish my cottage number, everyone will call. I'd like to just use my cell phone. Can you help?
Answer: Signals in many cottage areas are marginal and cannot penetrate the walls of your cottage. Kingtone repeater can be easily deployed to provide coverage throughout your cottage. In a cottage, the donor unit is generally deployed outside – for example, under the eaves or on a utility pole. Because it is more sensitive than your phone and is mounted higher up, it can usually detect signals that your phone can't. The coverage range of 15,000 to 50,000 square feet (2,000 to 4,600 square metres) is adequate for most cottages.
You get the privacy of your cottage and the convenience of your cell phone. Just remember to turn it off sometimes!
Question: I'm a production manager in a factory, and no cell phones work inside. I spend most of my time in a couple of spots. Can you help?
Answer: Factories and warehouses with lots of metal construction often have poor signals. While these buildings may be large, the employees are generally located in only a few areas.
Kingtone repeater can be easily deployed to provide coverage in those spots. The donor unit is deployed on the roof and connected to a coverage unit inside. The coverage range of up to 100,000 square feet is adequate for most trouble spots. Multiple units can be easily deployed to cover office areas and other working locations.
Question: No cell phones work in the parking garage. While many employees carry cell phones for safety, the phones aren't useful in any of the high-risk areas.
Answer: Kingtone repeater an provide coverage in parking garages above and below ground. That's useful for emergencies, and it removes the irritation of calls being dropped when you park your car.
The donor unit is placed where it can detect a signal (this might be outside or in a stairwell). It is connected to the coverage unit, which is placed in the centre of the garage up to 245 feet (75 metres) away.
Question:I work in an office building with no outside access. The windows don't open, and I can't get to the roof. How can I install?
Answer: Kingtone repeater can be deployed completely within your office. It is the only in-building in-building solution.
The donor unit needs to be placed somewhere where it can detect a signal (this might be beside a window or the outside wall). The coverage unit is then placed roughly in the centre of the problem area. Ideally, the two units are separated as much as possible.
For esthetic purposes, the entire system can be placed above the ceiling tiles.
Question: Does Kingtone repeater provide coverage for multiple users within a trouble spot?
Answer: Absolutely. Kingtone repeater is fully adaptive and supports multiple simultaneous users. Multiple units can be easily deployed to cover office areas and other working locations.
Question: Does Kingtone repeater support CDMA and GSM/WCDMA/PCS?
Answer: Yes, Kingtone repeater offers a portfolio of products that provide you with "always on" coverage solutions for both 800 MHZ (cellular) and 1900 MHZ (PCS) bands.
Question: Is Kingtone repeater specific to a frequency band?
Answer: Kingtone repeater supports both A and B band selectivity, allowing carriers to help their own customers without interfering with alternative carriers.
Why choose us?
1.We are a factory specializing in GSM repeater more than 10 years,products with high quality and dicect price!
2.There are many skilled workers and professional experienced techonologists in our factory.If you have any question please don't hesitate to contact us!
3.OEM & ODM are welcome!
Product range:GSM/CDMA/DCS/WCDMA/TETRA/LTE Wireless Full Band Repeater,Fiber Optic Repeater,Frequency Shifting Repeater,Digital/Analog Repeater,Trunk Amplifier etc.
Support System | Frequency Range | Output Power |
GSM900MHZ | 890-915MHz/935-960MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
DCS1800MHz | 1710-1785MHz/1805-1880MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
PCS1900MHz | 1895-1910MHz/1975-1990MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
GSM850MHz | 824-849MHz/869-894MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
CDMA450MHz | 450-457.5MHz/460-467.5MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
CDMA800MHz | 824-849MHz/869-894MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
CDMA1900MHz | 1880-1890MHz/1960-1970MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
UMTS850MHz | 824-849MHz/869-894MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
UMTS2100MHz | 1920-1980MHz/2110-2170MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
GSM900/1800MHZ | 890-915MHz/935-960MHz 1710-1785MHz/1805-1880MHz | 2W/5W/10W/20W/ |
GSM850/1900MHZ | 824-849MHz/869-894MHz 1880-1890MHz/1960-1970MHz | 2W/5W/10W/20W |
GSM900/UMTS2100 | 890-915MHz/935-960MHz 1920-1980MHz/2110-2170MHz | 2W/5W/10W/20W/ |
Our present manufacturing service:
1. Single-band repeaters of LTE/GSM/CDMA/PCS/DCS/WCDMA
2. Dual-band repeater of GSM/DCS; GSM/WCDMA; CDMA/PCS;
3. Tri-band repeater of GSM/DCS/WCDMA
4,Trunk Amplifier
5. All kind of Antenna/Splitter/Connector/Cable
CDMA800 33dBm mobile signal booster 2watts 800MHz signal amplifier low power indoor/outdoor cellular signal repeater booster
Guarantee:
All the Items have twice test before packaging
30 Days Customer Satisfaction
Return Policy:
If for any reasons you are not satisfied with the products within 30 days, please contact us and we will advise return detail and arrange a full refund. Buyer is responsible for return shipping costs.
Feedback Policy:
Please leave us a positive feedback if you satisfy with our total services as well as the products, We will provide the priority of the after-sales service.
Warranty:
Three Months Free Replacement
12months Manufacturer Warranty
Contact Person | Amy Su |
Tel | +86 595 228857992 |
Fax | +86 595 22155502 |
Mobile | +86 18959901933 |
Skype | amysu217226 |
Web | ; |
Add | Bld B,Yucheng base,Keji road,Fengze High-Tech Park,Quanzhou,Fujian,China |
Kingtone, | Connecting the world seamlessly! |
Key Words: CDMA800 33dBm mobile signal booster 2watts 800MHz signal amplifier low power indoor/outdoor cellular signal repeater booster