Shot-blasting machine Model FSM0816-8

Principal structure

Shot-blasting machine is a kind of shot-blasting equipment applied to steel structure welding workpiece and H-style steel. It can put strong shot blasting on the steel surface in reset condition, clearing away the rusty spot, rusty scale, welding slag and scale on it and gaining metal gloss surface in a certain degree of finish and uniform, in order to remove stress and improve surface lacquer quality and rot proofness of steel structure and steel.

This machine is mainly composed of cleaning room, roller conveyor, impeller head, conveying system, longitudinal screw conveyer, hoister, feed screw conveyer, separator, shot-supply organization, duster, pneumatic system and electrical control system.

Technical data:

Size of workpiece                             

Width×height                          max 800×1600mm

Length                                   12000mm

Quality requirement                              Sa2.5, Ra15-50

Impeller head (8)

Model of impeller head                             Q034II

Quantity of shot-blasting                            8×250kg/min

Turning speed                                     2950r/min

Shot blasting speed:                                65-70m/s

Power of shot-blasting machine:                       8×11KW

Workpiece conveying system                      

Length of input roller conveyor                        12000mm

Length of output roller conveyor                       12000mm

Load capacity of roller conveyor                         1000kg/m

Conveying speed                                    0.4-4m/min

Driving power                                      2×2.2kw

Shot conveying system

Capacity of shot conveying                           120T/h

Longitudinal screw conveyor

Driving power                                     5.5KW

Power of bucket hoister

Driving power                                     7.5KW

Hoisting speed                                     1.5m/s

Hoisting capacity                                   120T/h

Power of curtain separator

Driving power                                     5.5kw

Width of curtain                                    2000mm

Steel shot diameter                                 1.2-1.8mm

Model of dusting system:                           LMF-I

Discharge quantity                                  max 120mg/m³

Wind speed of the gate                               max 5m/s

Handling volume of dusting system                    18000m³/h

Quantity of filter core                                12

Filtering size (12×20)                               24 square meter 

Centrifugal ventilator Model                          4-72-5A

Centrifugal ventilator air volume                      18000m³/h

Centrifugal ventilator wind pressure                   2022 Pa

Centrifugal ventilator power                         15KW

Cleaning system ventilator power                       15kw

Overall power:                                     about 140Kw

Whole machine air volume                           18000m³/h

Working principle

The workpiece lay on the roller conveyer to set speed through the shot-blasting chamber. Before the workpiece get into the shot-blasting area, start on the shot feeding device, at that moment, the impeller heads begin running on load. After the strike of high speed shot bundle, the scale, dirt and scaffold on the surface of workpiece will be cleaned. The working is cycling and continued until no workpiece get into, then close shot valve and the impeller head stop working.

Goods supply range                              

Cleaning room assembly: main cleaning room, sub cleaning room, rubber curtain, guard plate for shot-blasting room, impeller head

Roller conveter: outdoor roller conveyer, indoor roller conveyer, chain, chain wheel

Screw conveying system: longitudinal screw conveying system, feed screw conveying system, hoister, separator, shot supply valve

Dust palletizing system: dust pipe, duster, fan, wind pipe, chimney and reverse blowing clean device

Electric controlling assembly: electric controlling box

Spare parts(vulnerable parts):

Parts manufactured by users

a. Foundation (diagram paper will be provided by seller)

b. Foundation bolt and expansion bolt

Payment:30% TT in advance and the balance before shipment.

Delivery time: 45days after received advance payment.

Warranty time: 12 months after commissioning date.

Installation:  these machines’ installation is need about 2 technicians for about 30days. The Buyer should pay for the round tickets (start from Shanghai), hotel, restaurant, inland travel in the Buyer’s country. And a salary of USD50/day per engineer is afforded by buyer. The Buyer should also provide a Chinese interpreter to offer assistance for the Seller’s engineers.