Product Details

1. FORMING STATIONS
All the forming rolls coming into contact with the painted surface of the conductor pipe are hard chrome plated to insure long roll life and protect the finish on the pipe.

2. AIR CLUTCH AND BRAKE DRIVE
The use of an air clutch and brake enables the drive motor to run continuously. This is essential when making short pieces for producing elbows. Elbow blanks can be made automatically at the rate of 1200 pieces per hour.

3. RUNOUT CHANNEL
A runout channel is provided to receive the completed pipe. The channel is 10' long and has one adjustable leg support.

4. Main introduction

No.	Item	Specifications
1	Pipe size (one machine for one size only)	~ Rectangular: 23 inch, 33 inch, 3*4 inch ~ Round: 3 inch or 4 inch ~ Customized size
2	Forming speed	~ Standard: 6m/min
3	Material thickness	~ Aluminum only: 0.4-0.6mm
4	Coil spools	~ One 381mm I.D. spool included
5	Electrical system	~ 110 volt or 220 volt ~ ON/ OFF switch ~ Forward/ Reverse switch ~ Entrance JOG button
6	Model	~ Semi-automated: length control with limit switch
7	Driven system	~ Urethane top and bottom drive rollers for smooth even ~ Non-twisting drive
8	Machine size	~ Length: 3680mm plus cutoff saw ~ Width: 380mm ~ Height: 1065mm
9	Cutoff	~ Flying saw cutoff