Specifications

The materials are clamped by the cylinder and are driven by the servo motor into the cutting area of the machine.

USE AND CHARACTERISTICS:

 1. The machine is applicable to continuous and large-batch cutting of nonmetal materials such as sponge, pearl cotton and EVA etc. in various factories by cuttig die.

 2. The conveying part adopts PLC control. The materials are clamped by the cylinder and are driven by the servo motor into the cutting area of the machine. After die cutting, the finished products are discharged. The feeding length can be adjusted conveniently through touch screen.

3. The main machine adopts four-column guiding, double-crank balancing and hydraulic driving, which can guarantee the speed and accuracy of die cutting of machine. All movable connecting parts are equipped with central oil supply automatic lubricating device, which reduces the abrasion to the minimum extent.

4. The inlet and outlet of cutting area of the machine are installed with safety protection devices, which can guarantee personal safety of operators.

5. The die cutter is fastened by pneumatic clamp device so as to make the replacement of cutting die convenient and prompt.

6. Cutting board micro-movement device can be allocated to evenly consume the cutting board and save cost.

7. Products of special specifications can be customized.

 

TECHNICAL SPECIFICATION:

Max cutting force	100T	150T	200T
Tension distance	50-200MM	50-200MM	50-200MM
Cutting area	1600×900MM	1600×1000MM	1600×1000MM
	1400×900MM	1400×1000MM	1400×1000MM
Motor power	7.5KW	11KW	11KW
G.W	8000kg	12000kg	14000kg
	7800kg	11500kg	13500kg