Pipe Threading Lathe
Negotiable /Set
Min.Order:1 Set
Tengzhou Hising Machine Tools Co., Ltd.
The Specification of the Pipe Threading Lathe(Q1327):
Outline size | |
Length 3553mm | Width 1540mm |
Height 1505mm | Weight(not include bracket,chuck) 7300kg |
Main specification | |
Max. Taper 1:4 | Max.piece turning diameter on machine 800mm |
Pipe diameter 70-273mm | Max.length of shaft to be machined 1000mm |
Max. stroke of taper bar 930mm | |
Main shaft | |
Speed steps of main shaft 9 | Bore of main shaft 280mm |
Speed range of main shaft 7.7-230r/min | |
Feeding system | |
Feeding range in both directions 18 | |
Rack feeding range at a turn of main shaft | |
Thread range in metric system 4 | Transverse 0.04-0.65mm |
Thread range in British system 6 | Lengthwise 0.1-1.46mm |
Screw pitch in metric system 1-15mm | |
Screw pitch in British system 1-15t.p.i | |
A saddle moving fast lengthwise 4m/min | |
Saddle stroke whenever the slide handlewheel is turned a scale 0.20mm | |
Rack | |
Max. Stroke of rack 210 mm | Section size of a knife 30×30mm |
Rack turning angle ±90° | |
Rack stroke whenever the lower slide turns at a scale 0.05mm | |
Rack stroke whenever the lower slide turns at a scale 0.05mm | |
A vertical distance from the main shaft center line to installation surface of a knife 33mm | |
Tailstock | |
Apical sleeve diameter 100mm | Apical sleeve stroke 250mm |
Apical sleeve taper Morse 6 | Horizontal stroke of tailstock ±15mm |
Apical taper Morse 6 | |
Power part | |
Gear pump belt 1-A800 | Fast speed motor 2A0S5632 0.37KW2700r/min |
Main motor belt B1700 | Clamp motor 1.5KW2860r/min |
Gear pump CB-B6 2.5Mpa 1450r/min | Main motor 15KW1460r/min |