Specifications

hydraulic drill:keeping bracket is installed on the hoist to form a double wheel support structure,can withstanda strong blow.

The Specification of Hydraulic Drill(HZ-130Y):

 

Unity  machine parameter
Drilling depth	130mm
Max. Open hole caliber	220mm
End hole caliber	75mm
Drill pipe caliber	50mm
Drilling angle	90°~75°
Drill weight	560kg
Spindle
Spindle speed	142;285;570r/min
Spindle stroke	450mm
Hoist
Max.lifting capacity	1600kg
Single line lifting speed	0.41;0.82;1.64m/s
Reel caliber	140mm
Tightrope caliber	13mm
Tightrope size	27mm
Mud pump
Type	Horizontal single-urn double action
Flow Diesel/Electric motor	95/77 l/min
ure	1.2Mpa
Work pressure	0.7Mpa
Water inlet diameter	30mm
Water outer diameter	20mm
Triangle conveyer belt	B1575mm

 

 

Specially recommend:

l Keeping bracket is installed on the hoist to form a double wheel support 

structure,can with standa strong blow;

l Vertical box four couple of bearings positioned to ensure the rotary machine 

has a sufficient rigid response to gravel layer, the complex geological conditions;

l This machine adopts national patent technology taper clutch,with characteristics 

of strong transmission torque,easy operation,free maintenance;53×59 driving lever 

is adopted,high rigitidy,,strong delivery torque.

 

Suit scope:

 

Geological general investigation and exploration,road and tall building ground still 

exploration,kinds of hole in concrete structure,river levees,subgrade grouting hole 

drilling and direct grouting,civil wells and earth central air conditioner,etc.