HDPE pipe hydraulic butt fusion machine
USD $7,150 - $8,200 /Set
Min.Order:1 Set
Wuxi Yuda Plastic Pipe Welding Machinery Factory
HDPE pipe hydraulic butt fusion machine
PE Pipe Welding Machine, But Fusion Welding Machine, Hot-melt Welding Machine, Hydraulic butt fusion welding machine. Hydraulic butt welding machine, HDPE butt fusion machine. Welding machine. Butt fusion Equipment
Features:
1. The machine body is equipped with four main clamps with the third clamp axially moved and adjusted.
2. Removable PTFE coated heating plate with separate temperature control system.
3. Electric milling cutter with reversible double cutting edge blades.
4. Hydraulic unit provides welding machine with compressing power.
5. Be made of lightweight and high strength material; simple structure and easy to operate.
6. Low starting pressure ensures reliable welding quality of small pipes.
7. Separate two-channel timer shows time in soaking and cooling phases.
8. High-accurate and shockproof pressure meter indicates clearer readings.
9. Mechanical and electrical equipement conforms to IEC60204-1:1997
10. Parameters of pressure, temperature and timing of welding can be set. The set parameters can be saved for a long time . Chinese or English menu is optional.
11. Liquid-crystal display set value and actual measured value of voltage, temperature and timing during welding process. There is character prompt for welding process and data printing, Chinese or English is optional
12.Flashing indicator light prompts phase of welding
13.Operation is very simple,Voltage decrease and heat penetration voltage are searched and locked automatically.
14. It has the capacity to record welding data of 600 pipe Joints. The data can be printed together or immediately after welding
15.It has fault alarm and dispaly of overvoltage OV, undervoltage UV, lack phase LP, faulty phase FP, open circuit of temperature sensor PT100 OC and short circuit of temperature sensor PT100SC
HDPE pipe hydraulic butt fusion machine
Welding ranges | 160mm-180mm-200mm-225mm-250mm-280mm-315mm |
Ranges of application | PE,PP and PVDF |
Working voltage | ~220V ±10%,50Hz |
Environment temperature | -10° ~ 45° |
Total power | planing tool:1.1 kW, heating plate: 3.1 kW , hydraulic unit motor: 0.75kW |
components | basic frame, heating plate, planing tool, and support (for planing tool & heating plate) |
heating plate characteristics | PTFE coated heating plate, adjustable knob for temperature control, difference in heating plate surface temperature ≤±7°. |
Other device | Electronic count-down timers for heating and cooling time. |