Patent clay mitt works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars. With either dual action orbital polisher or hand application, it safely and easily removes paint overspray, water spots, fresh tree sap, fallouts and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic.  It can be cleaned by simply rinsing off the accumulated contaminates with water. 

->Works 3 times faster with advanced patented polymer technology  

->Wipes on & off easily for a  slithery finish

->Lasts up to 4 times longer than clay bars(50-80 or more vehicles with one mitt)

->For moderate to heavy surface contaminants, works great on older or light colored vehicles.

Instructions:

1. Thoroughly wash vehicle prior to preparation.

2. With car soap, water or clay lubricant, spray a generous amount onto the working surface and on the

     polymerized rubber surface of the clay mitt.

3. Using light pressure, gently glide the clay mitt from side to side. When the clay mitt glides freely, the surface

    contaminants have been removed.

4. Wipe off the residual lubricant if there is with the other side of microfiber. Rub your hand across the  

     surface; it should be as smooth as glass. If not, repeats the process.

5. After each use, simply rinse the mitt in warm water...no soap required.

Notes:

• Use only on clean, cool paint and out of direct sunlight.
• Best operation temperature range is 10° C to 38º C.
• Do not use on surfaces or store in temperatures over 60º C or the polymerized rubber will start to melt.
• Only need to use car wash soap or clean water as a lubricant.