Specifications

1.Xaar128 Print Head Cleaner Made by LD
2.Cleaning Epson Konica, Xaar 128/300/500 etc
3.Ultrasonic & peizo cleaning system

Xaar128 Print Head Cleaner Made by LD

 

Xaar128 Print Head Cleaner Parameter

 

Ultrasonic power- ------50W

Ultrasonic frequency----40KHZ

Clean efficiency- -------- 99%

Automatic cleaning, max clean 4 print heads once

Print Head Cleaner Machine  Input electricity--------- AC220V+-10%  50Hz

 

Xaar128 Print Head Cleaner Made by LD mainly used for cleaning  Epson, Spectra, Seiko, Konica, Xaar 128/300/500 etc. print head.In addition, it can clean indoor print heads, like 600 print heads, 1200dpi print heads etc.

 

 

Xaar128 Print Head Cleaner  Operate

 

• Step1 Open the bottom lid of the machine and the lid of cleaning fluid tank
• Step2 Pour cleaning fluid into the cleaning fluid tank.. The minimum should be over the water outlet port of the tank
• Step3 Cover the cleaning fluid tank lid .and then the bottom lid of the machine
• Step4 Open the top lid and put onnozzle holder
• Step5 To connect the inlet of print head to the flushing pipe
• Step6 To insert the print head into nozzle holder
• Step7 The inserted print head
• Step8 Pour cleaning fluid into the cleaning tank ,to close to the water outlet port
• Step9  Press the red bottom to start theultrasonic cleaning
• Step10 Press the nozzle holder by hand ,so that the nozzle can be immersed in cleaning fluid.
• Step11 Release the nozzle holder after ultrasonic cleaning about 3 min. Then press the corresponding green buttom to rinse the print head
• Step12 Repeated cleaning for several times.and Cleaning the print head again after changing the cleaning fluid . Until the cleaning fluid which jet from the nozzle is neat and clean. Then re-install it on the printer after cleaning up the print head