Specifications

*432pcs high quality LED light of PDT mask with oxygen spray
*Oxygen therapy:infusion,spray,inhalation,mask
*Vacuum therapy

Features

1.Adopting 320×240 LCD touch screen with IC card, and key-press to enter, meet different demand of the customers.

2.Gathering 3 functions in one, you can choose pure oxygen treatment, negative pressure inhaling or PDT active light mask to treat, the result will be more comprehensiveness.

3.7 types of specific light source of PDT photodynamic therapy, red, green, blue and yellow, etc,suit for different kinds of skin,finish large treatment area within short-time therapy.

4.Safe, painless, non-invasive, no calorific sensation, non-risk of burning, easy to use.

5.No any other special consumable materials, and can extend to kinds of aesthetics projects.

Three Functions
1. Functions of Oxygen treatment

1) Pure Oxygen insert to face or body

2) Oxygen spray

3) Inhalation & Aromather

4) Pure Oxygen mask

2. Negative pressure inhaling function

Include: negative pressure inhaling on face and negative pressure inhaling on body.

To carry lymph by using the ball bearing on the probe and standard pressure output by appliance, giving connective tissue and lymph system in the face and body a deep massage, strengthening functions of tissue, promoting blood circulation, discharging extra water and pigment, improving skin, smoothing skin, promoting spring to achieve tighten and reducing wrinkle, repairing contour and figure.

3. OxyPDT sparklife mask

Based on photo dynamic theory to treat inflamed acne, repair aging and sun burn skin, without hurt and uncomfortable sense. To treat shining by high purity, high rate light of red, blue, green and yellow sent out by treatment system. Adopt continuous or pulsed light to change cell structure. OxyPDT is on the base of PDT to treat synchro with adding pure Oxygen, while PDT kills bacterium. Oxygen will provide a suitable condition for new cells, speed the effect of treatment and shorten time.
Red light:Adopts640±10nm ESLD

Blue Light:Adopts the ESLD with the wave length (490±10)nm

Yellow Light:Adopts the ESLD with the wave length (590±10)nm

Green Light:gAdopts the ESLD with the wave length (627±5)nm

OxyPDT Technical Specifications
1. OxySpa Basic part

Produce oxygen	Transformation adsorption method(SPA)
Inhalation & Aromatherapy	Flow rate	0.5-5L/Min
	Consistency	0.5-3L/Min/hour,95%±3%
		3-4L/Min/hour,90%±3%
		4-5L/Min/hour,75%±3%
Oxygen Spray	Consistency	90%±3%
	Flow rate	5L/Min±0.5
Oxygen Infusion	Max instantaneous pressure	2.2bar
	Consistency	90%±3%
	Pulse width of oxygen infusion	1-255ms
	Cycle of oxygen infusion	0.1-9.9s

2. Vacuum part

Method of forming	No-oiled vacuum air pump
Vacuum degree	-90-0 KPa
Mode of filter	Multiplayer filter
Instructions of vacuum degree	Digital
Vacuum degree adjust	Key-press adjust

3.OxyPDT part

Types of light source	ESLD
PDT output rate	Red	640±10nm
	Blue	490±10nm
	Yellow	590±10nm
	Green	525±10nm
PDT output mode	Continuous light or pulsed light
Oxygen mask	Consistency of oxygen	90%±3%
	Rate of oxygen	5L/Min±0.5
Dimension of light spot	170mm×55mm×3
Max energy density	200mw/cm2