Specifications

V Series plastic injection molding machines able to save 30%-50% electric power consumption.

Plastic Machine

GS Variable pump drive injection molding machine is precision and energy-saving series, assumers perfect combination of GS state-of-the-art machine processing together with internationally advanced variable pump control technology.

 

This type of injection molding machine adopt high responsive proportional variable pump system thus to enable the high mach of power between hydraulic output and machine effective operation which avoids energy loss from high pressure throttle flow. Compared with normal constant pump drive machine, the variable pump drive machine is able to save electric power consumption by 30% up to 50%.

 

In addition, the machine less heating enables save of cooling water by 30%, debasing peripheral noise and extension of service life of hydraulic sealing parts and oil to minimize operation and maintenance cost and meanwhile to meet the strict international environment protective policy.

 

GS  variable pump drive injection molding machine is sure to bring for customers incomparable cost efficiency advantages.

The key advantages:

• Save of energy
• High speed system response and short molding cycle
• Largely decrease system oil temperature
• Reduce mold open and close crash to extend service time of machine and mold tool.
• To extend service life of oil piping system, to reduce maintenance possibilities and save maintenance cost.
• Higher requirement for hydraulic oil; provides with imported high quality oil strainer.

GS558		A	B	C	D
Screw Diameter	mm	80	85	90	100
Screw L/D Ratio	L/D	21.2	20	18	17.6
Injection Pressure	Mpa	201	178.6	159.3	129
Shot Size(Theoretical)	cm3	2362.5	2667	2990	3691.4
Injection Weight	g	2150	2427	2721	3359
Injection Rate	g/s	505	568	700	832
Plasticizing Capacity	g/s	97.4	109.2	134.8	163.1
Screw Speed	rpm	0-130
Injection Stroke	mm	470
Clamp Tonnage	KN	5580
Toggle Stroke	mm	850
Space Between Tie Bars	mm	840*830
Max.Mould Height	mm	850
Min.Mould Height	mm	320
Daylight Opening	mm	1700
Ejector Tonnage	KN	158
Ejector Stroke	mm	220
Ejector Number	piece	17
System Pressure	Mpa	16
Pump motor Power	KW	55
Heater Power	KW	44.45
Hopper Capacity	Kg	100
Machine Dimension(L*W*H)	m	8.63*2.27*2.45
Oil Tank Capacity	L	640
Machine Weight	t	22