IP QAM Modulator/IP Modulator/CATV modulator/QAM modulator
Negotiable /Piece
Min.Order:1 Piece
Modulator/QAM Modulator 4 in 1/DVB-S/DVB-C/DVB-T modulator/16/32/64/128/256 QAM modulator
QAM Modulator/ Modulator/Modulator Multiplexer/CATV Modulator/16,32,64,128,256QAM Modulator
COL5600P qpsk 16,64 qam ip to dvb-t rf modulator multiplexer/Modulator/IP to DVB-T Modulator
COL5600J DQPSK,QPSK, 16,64 QAM ISDB-T modulator/rf modulator/Modulator/ISDB-T modulator
COL 5600A 8 VSB America ATSC-T rf modulator/Modulator/ATSC-T modulator
COL5600 QPSK 16QAM,64QAM dvb-t modulator/Modulator/DVB-T modulator
Outline
COL5400C IP QAM Modulator with MUX & SCR is the latest generational Mux-scrambling-modulating all-in-one device. The modulator design of this device makes each of its daughter cards stand-alone when operating. Each daughter card can receive the UDP format TS through GE port, it can also support up to 256 different IP address or port No. It’s like the all-in-one device combined with 8 multiplexers(256 channels inputs), 8 scramblers and 8 QAM (DVB-C) modulators, which can output adjacent channel RF carrier(48M~860M)through the two RF output interfaces. Additionally, 1U chassis supports up to 3 modules’ COL5400C (256 channels mux-scrambling-modulation) while the 4U chassis supports up to 12 modules (1024 channels mux-scrambling-modulation). This COL5400C IP QAM Modulator with MUX & SCR has excellent integrated level, powerful performance and low cost, which is especially adequate for the new generation CATV system.
Features
Specifications
Input | Interface | 1GE(RJ45) or 1 SFP input port,hot backup |
Transport Protocol | TS over UDP,unicast and multicast, IGMP V2/V3 | |
Transmission Code | Max 840Mbps for all channels | |
MUX | Input Channel | 256 |
Output Channel | 8 | |
Max PIDs | 256 per channel | |
Functions | PID remapping(auto/manually optional) | |
PCR accurate adjusting | ||
PSI/SI table automatically generating | ||
Scrambling Parameters | Max simulscrypt CA | 4 |
Scramble Standard | ETSI 101 197,ETSI 103 197 | |
Connection | Local/remote connection | |
Modulation Parameters | QAM Channel | 8 |
Modulation Standard | EN300 429/ITU-T J.83A/B/C | |
Symbol Rate | 5.0~7.0Msps,1ksps stepping | |
Constellation | 16,32,64,128,256QAM | |
FEC | RS(204, 188) | |
RF Output | Interface | 2 F typed output port for 8 carriers, 75Ω impedance |
RF Range | 48~860MHz,1kHz stepping | |
Output Level | -16dBm~6dBm(output IP from one F type),0.5dB stepping | |
MER | ≥ 40dB | |
ACLR | -60 dBc | |
System | Network management software (NMS) supporting | |
General | Demission (WxLxH) | 482mm×455mm×44.5mm |
Weight | 6.1kg | |
Temperature | 0~45°C(operation),-20~80°C(storage) | |
Power Supply | AC 100V±10%,50/60Hz or AC 220V±10%,50/60Hz | |
Consumption | 15.4W |
Rear panel:
One COL5400Cillustration:
1 | RF1 testing port ( 1-4 carriers monitoring) |
2
| RF2 testing port (5-8 carriers monitoring) |
3 | RF1 output port (1-4 carriers RF output) |
4 | RF2 output port (5-8 carriers RF output) |
5 | NMS:network management software/CA communication,Ethernet interface |
6 | GE1 Input:IP signal input,SFP connector |
7 | GE1 Input:IP signal input,RJ45 connector |
8 | GE2 Input:IP signal output,SFP connector |
9 | GE2 Input:IP signal output,RJ45 connector |
10 | Reset IP:Reset webmaster IP address,recover it to default IP address 192.168.2.1 |