QY-850 Cement Mortar Spraying Machine
QY-850 High pressure mortar spraying machine is a Screw Pump high-pressure mortar spraying machine, with advanced technology, simple operation and maintenance, it can be operated skillfully without special training. QY-850 High pressure mortar spraying machine adapted spraying material included: putty powder, paint, latex paint, lacquer, cement mortar, dry mortar, thermal insulation, waterproofing materials, fireproof materials, insulation materials, sound-absorbing materials and other water-soluble material.
Spare Parts
1. 1*10m Material Hose; 1*10m Air Hose
2. 1*Spraying Gun
3. 1*Full set Nozzles
1.Basically no ash falls, water, and material, the cost can be reduced more than 20%;
2.Co-mortar operations, such as cement mortar, but also for paint, lacquer, relief effect coatings, waterproofing materials, refractory materials, such as spraying operations, is used for housing protection, paint, paste on the bottom of suitable models
3.Simple operation; speed, high efficiency, low labor intensity
4.Project quality assurance; a multi-purpose machine that can spray mortar, fire protection materials, refractory materials.
5.It carries with an air compressor.
Technical Data:
Power | 380v/5KW |
Flow(m³/h) | 5m³/h |
The maximum output voltage | 0-3MPa |
Output voltage of Air Compressor | 0.5-1.5Mpa(5-15kg/cm²), 0.36KW |
The level capacity of transmission | 60m |
The vertical capacity of transmission | 30m |
The maximum aggregate particles | 0-8mm |
Capacity(L) | 50L |
Weight(kg) | 250kg |
Volume size | 150cm*50cm*130cm |
Applications:
The cement spraying machine is mainly used in the building construction industry, both insideand outside wall for
plastering and spraying mortar, external wall insulation mortar spraying, the materials can be mortar roughcast,
refractory coating, large building spraying fire material, waterproofing coating and so on.
1, In the construction engineering industry, the machine is used for horizontal and vertical transferring and spraying mortar or cement.
2. In the chemical and paper industry, delivering the raw pulp material and waste materials.
3. In coal-fired power plants, the machine is used to deliver the fine coal mortar.
4. In the mining tunnel construction industry, the machine is used to grout and protect slope.
5. In the highway pavement maintenance, it used for road surface collapse pressure mud filling.
6. In Prestressing structure construction, the machine is used for cement road surface collapse pressure mud filling.
7. In water conservancy engineering, it is used for reinforcing the dam.
8. In metallurgy, steel and other industry, the machine is used to maintain the blast furnace and slurry infusion of the other equipment.